Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wind Loads
[ 4 Answers ]
Does anyone out there know how to calculate the wind load on a wooden fence? I have used 12 foot 4 x 4 pressure treated posts set in 4 feet of concrete spaced 8 feet apart. The concrete was poured in a 12 inch in diameter concrete tube. I used a strong concrete mix in the ratio 3:2:2. I want to use...
No software loads but linux
[ 7 Answers ]
I'm working on an e-machine which has a 19gig hd a 1.0 ghz celeron, a cd, and 256 mb PC 100 memory It sees all this stuff in the bios( this means that its not a hdd,cd,floppy,mem error) it runs knoppix ( linux on a cd) fine ( this means that its not overheating) knoppix sees the hard drive...
Bitmap into ole object field in MS Access
[ 3 Answers ]
I have an Access 2000 database table with an OLE object field, into which I insert a bitmap image. (This is an existing database whose design I am not authorized to change). When I do this on the system in my office, everything is fine. The image is properly displayed on the form. However, when I... View more questions Search
|