Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Copper line from wall too short?
[ 4 Answers ]
Take a look at this photo. I had a plumber do the work, but now I am a little concerned. I bought a cap/cover ( forget the correct name of it) to put on the wall which the water copper line coming from wall, which goes to valve then to the toilet. He made the copper tubing too short and could...
UF wire and copper propane line in same conduit
[ 1 Answers ]
Is it safe and allowed to run 10/3 UF electric cable and 1/2" copper tubing for propane in the same 2" PVC conduit 18" underground from a house to a garage?
How to plug leaking oil heat copper lines at floor level
[ 1 Answers ]
Copper supply and return lines (1/2" copper) remain from a removed oil heater. The 3' lines are cracked at the concrete floor level and weep oil when moved. What is the best way to seal these lines at floor level? I have thought of using a wooden or metal plug, solder or epoxy. Since the lines...
How to disconnect copper elbo from wall feed PVC
[ 3 Answers ]
I am installing a new water softener. If I could rotate the existing copper elbow feed, for old softener, it would make the new installation much neater. How can I rotate an elbow connected into PVC that has a clamp? View more questions Search
|