Ask Experts Questions for FREE Help !
Ask
    dm7211961's Avatar
    dm7211961 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 6, 2012, 12:30 PM
    Is there a way to test the heating element on a cal spa model PS-5-B hot tub
    Is there a way to test the heating element on a 1995 Cal Spa model# PS-5-B?

    I talked to someone at Spa Parts Warehouse (recommended by tech support at Cal Spas as that they don't support the older models) he said it is a 4.5 KW flow through heater element.

    I'm not sure if I need just the element or the whole assembly

    Any help would be greatly appreciated

    Thank You in advance

    Dave Manevich
    joey4029's Avatar
    joey4029 Posts: 40, Reputation: 2
    Junior Member
    		  
    #2

    Jun 29, 2012, 08:09 PM
    Quote Originally Posted by dm7211961 View Post
    is there a way to test the heating element on a 1995 Cal Spa model# PS-5-B?

    I talked to someone at Spa Parts Warehouse (recommended by tech support at Cal Spas as that they don't support the older models) he said it is a 4.5 KW flow thru heater element.

    I'm not sure if I need just the element or the whole assembly

    any help would be greatly appreciated

    Thank You in advance

    Dave Manevich
    Its June 29th ,are you still having a problem?
    joey4029's Avatar
    joey4029 Posts: 40, Reputation: 2
    Junior Member
    		  
    #3

    Jun 29, 2012, 08:13 PM
    Quote Originally Posted by joey4029 View Post
    Its June 29th ,are you still having a problem?
    I have the same year/model and can walk you through it
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cal Spa not heating [ 27 Answers ]

Hi I have a Cal Spa. I do not know the model though, but we have had it since 1999. Recently the hot tub has not been heating up. The pump will run, but the heater will not turn on. The heating light on the digital screen is not on even though I adjust the temperature. I have been looking up...

Cal Spa Heating Problem [ 2 Answers ]

I have a 1995 cal spa model PS-5-B the GFI tripped when the heat came on and the low speed motor I finally got the GFI to stay on when I turn up the thermostat to turn heat on the indicator light goes on but not the low speed side of pump. The high speed side of pump works fine on switch...

Cal spa heating issues? [ 0 Answers ]

Ok here is where I stand with this unit. I have 240 volts at the heating coils, pressure switch checks out, turns on and off as it should. The issue is that the light that indicates heat isn't coming on. I know the tub heats up some what but it doesn't get hot, nor does the indicator light come on....

Regarding 1997 Cal spa heating [ 1 Answers ]

Hi Chaosmaster1, Thanks for your answer. The only error code is the flashing Flo, but I think it has always flashed this. I have water runnning through the heating tube and not air locks anywhere. Would it benefit me to install a new Temp. sensor? Also could you tell me how to test the current...

1997 cal spa 3000 not heating [ 2 Answers ]

Hi I have a 1997 cal spa. I have installed a new 2 speed motor, new heating element, new pressure switch and a new filter. Last year, no problems but this year cannot get it to heat up. Heat light will not come on no matter what I do. I will add that near the end of last year it was touch and go on...

View more questions Search