Ask Experts Questions for FREE Help !
Ask
    pomonabill220's Avatar
    pomonabill220 Posts: 10, Reputation: 2
    New Member
    		  
    #1

    Apr 5, 2008, 04:47 PM
    Totaline p374-2300 stat
    I have upgraded to the Totaline p374-2300sch stats. I have the install/owners manuals for the two 2200's that I am using, but need to know more about the 2300's that I am using.
    I know they have "economizer" and pre-occ purge functions as well as "morning warm up", but need to know how to set the parameters for the features.
    I have been unable to find the manuals for the 2300's anywhere.
    Anyone have a clue where to look?
    Thanks
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Apr 5, 2008, 07:40 PM
    If your using it for just a heatpump set up system the factory default setting is your best bet. Did the manual not come with it?
    pomonabill220's Avatar
    pomonabill220 Posts: 10, Reputation: 2
    New Member
    		  
    #3

    Apr 5, 2008, 08:06 PM
    Hello TTop...
    I bought it (and three others) and a zone controller (Honeywell TZ-4) as a package deal.
    The TZ-4 was new and the stats were not.
    I was able to get a user/installation manual with the 2200's I got, but just a user manual with the 2300's.
    pomonabill220's Avatar
    pomonabill220 Posts: 10, Reputation: 2
    New Member
    		  
    #4

    Apr 5, 2008, 08:09 PM
    I am particularly trying to use the remote sensor for outdoor indication. The stat has to be configured for remote sensor "on" so the stat does not use the remotes for control, just indication.
    GregMiddleton's Avatar
    GregMiddleton Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Aug 5, 2008, 09:42 AM
    The manual for the 2300 is available here
    http://www.xpedio.carrier.com/idc/gr...374-2300fm.pdf
    :)
    As well as other totaline thermostats
    WWG Totaline: Owner's Manuals: Totaline Thermostats
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Delta Monitor 2300 Series - low hot water pressure [ 9 Answers ]

Hi, I have a Delta Monitor 2300 Series tub/shower faucet, it has two handles, one for temperature and one for pressure. The hot water pressure is horrible in both tub and shower, cold is pretty good. Hot water pressure in rest of house is fine. From what I've read it sounds like something is...

Replacing a white rodgers t-stat with a totaline? [ 3 Answers ]

I am replacing a white rodgers thermostat (with emergency heat setting) that is controlling in floor heating in the main level of my house. It is non programmable. I am replacing it with a totaline p374-1800. The WR has a connection that is "E" that is jumper wired to W2. The totaline doesn't...

Wiring a Totaline P374-200 Thermostat [ 1 Answers ]

I have a Totaline P374-200 Thermostat,I can't seem to make it come on,could you possibily send me a wiring diagram for this thermostat.Thank You Ernie:confused: :confused:

Just 3 wire T-Stat connection, new stat, diff letters [ 6 Answers ]

Hi all, I've done tons of reading and can't find my specific wiring, tstat combo to figure it out... hopefully someone can shed some light on it for me. Natural gas forced air furnace, no air conditioning. Had a honeywell for the last 9 years, easy install, labelled easy. (but its dead) Wire...

Totaline P474-1100REC [ 1 Answers ]

How do I install the Totaline P474-1100REC with only a 2 wire system? Jim

View more questions Search