 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cal spa heating issues?
Ok here is where I stand with this unit. I have 240 volts at the heating coils, pressure switch checks out, turns on and off as it should. The issue is that the light that indicates heat isn't coming on. I know the tub heats up some what but it doesn't get hot, nor does the indicator light come on. Any Ideas?
|
||||
Check out some similar questions!
Hi I have a Cal Spa. I do not know the model though, but we have had it since 1999. Recently the hot tub has not been heating up. The pump will run, but the heater will not turn on. The heating light on the digital screen is not on even though I adjust the temperature. I have been looking up...
Hi Chaosmaster1, Thanks for your answer. The only error code is the flashing Flo, but I think it has always flashed this. I have water runnning through the heating tube and not air locks anywhere. Would it benefit me to install a new Temp. sensor? Also could you tell me how to test the current...
Hi I have a 1997 cal spa. I have installed a new 2 speed motor, new heating element, new pressure switch and a new filter. Last year, no problems but this year cannot get it to heat up. Heat light will not come on no matter what I do. I will add that near the end of last year it was touch and go on...
I have a cal spa Model PS2-F I was needing to know if there is a manual I can download somewhere for it! And I also need to know if this type of motor is just one speed or if it is two speeds?
I have a 1999 cal spa just got it and got it up and running tonight. The pump runs fine but the only time the heater light is on is when the pump is running is that normal?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
