Ask Experts Questions for FREE Help !
Ask
    thevez2's Avatar
    thevez2 Posts: 4, Reputation: 1
    New Member
     
    #1

    Jan 26, 2008, 08:37 PM
    Kenmore 90 series dryer - no heat
    My kenmore 90 series dryer (Model 110.62902100) runs but does not produce any heat. I've checked the house breakers and they are fine. I finally figured out how to open the front bottom cover, but don't know what to do from there.

    What parts should I check in what order, and where are they and how do I check them?

    I do have a meter, for checking continuity and such.

    I've fixed my washer numerous times and that was easy, but I seem to be clueless when it comes to the dryer.
    jack dandy's Avatar
    jack dandy Posts: 226, Reputation: 9
    Full Member
     
    #2

    Jan 26, 2008, 08:45 PM
    Gas or electric?
    thevez2's Avatar
    thevez2 Posts: 4, Reputation: 1
    New Member
     
    #3

    Jan 26, 2008, 08:49 PM
    Electric
    jack dandy's Avatar
    jack dandy Posts: 226, Reputation: 9
    Full Member
     
    #4

    Jan 26, 2008, 08:51 PM
    If its gas it could be the igniter, start the dryer and watch the pilot there should be a piece that glows and then ignites the gas in the tube, if you don't get a glow then its probably the igniter is bad.it should unplug(the connector) go to appliance store with old one to get new one. If this is the problem.
    jack dandy's Avatar
    jack dandy Posts: 226, Reputation: 9
    Full Member
     
    #5

    Jan 26, 2008, 08:52 PM
    Ignore my previous column thought maybe gas.
    jack dandy's Avatar
    jack dandy Posts: 226, Reputation: 9
    Full Member
     
    #6

    Jan 26, 2008, 08:54 PM
    Electric, could it be the electric coil is broke, that's what heats up to dry cloths?
    aamcooflinden's Avatar
    aamcooflinden Posts: 1, Reputation: 1
    New Member
     
    #7

    Oct 26, 2011, 06:34 PM
    I have a Kenmore gas dryer 90 series, everything seems to be OK and working fine but there is NO HEAT... can anyone offer any advice??

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore gas dryer, 80 series-NO HEAT [ 2 Answers ]

I have a kenmore gas dryer, that up until this point I have had no problems with-i dried a load of towels yesterday and then later that day the dryer was turning the clothes but there was no heat!--where do I look first?

Kenmore 80 Series Dryer - no heat [ 3 Answers ]

:confused: I have a Kenmore 80 series dryer that tumbles but does not give any heat in any modes. We've cleaned the lint out and we have clear passage through the vent. This is a gas dryer. Any ideas? Does this have a pilot light maybe?

Kenmore Series 80 elec dryer - no heat [ 2 Answers ]

This is a 5 or 6 year old Kenmore Series 80 Super Capacity Plus Electric Dryer. I'm not sure how much you can help. I have no experience with this stuff and don't have the tools or knowledge to check electrical connections. This drier and sister washer have been nothing but trouble for 5 years. ...

Kenmore 60 series dryer [ 1 Answers ]

Does anyone have a diagram of the dryer belt assembly? Also I just got done cleaning it extensively and wanted to know why the motor keeps going out. Before I took it apart it would work good for about 20-30 minutes. And then make a real loud noise and then shut off I figured it was because it was...


View more questions Search