Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Thermostat Wiring -- Where to put "O" wire if I have no heat pump
[ 1 Answers ]
I'm trying to replace an old Dayton thermostat (Model 2E137) with a newer Honeywell (either the 6300B or the 7400). I have a Bryant 80 furnace in the basement and a Bryant Quantum Plus 550A air con outside. The Dayton thermostat has wires going to six terminals: R, 4, Y, W, G, and O I know...
AMANA AC/HEAT pump will "not" turn on
[ 1 Answers ]
Wall UnitT-A/C-HEAT PUMP, 230V AMANA. Older model 10 years plus+++ Unit will not turn on, no noise, groaning, no fan/compressor, etc or any noise. Have verified wall receptacle does have power! Where do I start to look? Where would most likely problem would be?
Heat Pump "Fan" Mode
[ 3 Answers ]
When I change the setting from A/C to FAN does it draw the air in from the outside or only move around the air already inside my condo? If not, is there any way to draw in the air in from the outside rather than just pushing around the air inside? I live on the first floor and have no windows aside...
Rheem heat pump thermostat "EM" setting
[ 1 Answers ]
I have a Rheem model no. RHQA 1000B heat pump, but previous homeowner left no manual for it. I am puzzled at the "EM" setting on the thermostat. I would also like to download/obtain an operation manual for this unit. View more questions Search
|