Ask Experts Questions for FREE Help !
Ask
    PMoore30's Avatar
    PMoore30 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 8, 2008, 08:42 AM
    Symmons Temptrol Shower Valve - Cold Water Only
    I have several 10 year old Symmons Temptrol Model A shower units. One has recently stopped all hot water. A second is warm at best. I was told by a friend (not plumber) that I need to replace the mixer valve or the part that stopps scolding. The reason being is the part wears out and defaults to all cold as a safety feature?

    What part do I need and can I change it myself?
    tymwltl's Avatar
    tymwltl Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jul 6, 2010, 08:02 PM
    Symmons valves suck. Buy a Moen. Moens last and are SIMPLE to repair. I hate my Symmons valve that I have had to repair twice, My Moen is older an I have never had to touch it. The Moen is used just as much as the Symmons is and just keeps on working. Symmons valves SUCK.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Jul 7, 2010, 08:13 AM

    We do not use Symmons valves either...

    Your friend / plumber was correct. The anti-scald device gets stuck. Replace the cartridge and you will be fine. It is the best, fastest and cheapest way of fixing this problem...

    Good luck... Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Poor Water Pressure in Shower - Symmons Temptrol Unit [ 2 Answers ]

We have a Symmons Temptrol Model A shower/bath unit installed which has very poor water pressure when using the shower head. The bath facet pressure is adequate but does diminish when increasing the hot water temperature. When switching to the shower the water pressure slows to a dribble....

1993/1994 Symmons Temptrol--no cold water [ 1 Answers ]

I just had to flush my well to sanitize it. I now have no cold water coming out of the tub faucet/shower, just hot water. I fear that the unit may be clogged with sediment that came through the plumbing when I flushed the pipes. Is this an easy fix. I've been playing phone tag with a plumber....

Symmons temptrol valve on shower/tub [ 5 Answers ]

I can only get hot water from this brand new valve. Yhe only way to get cooler water is to reduce the valve to a point where I get very low flow. Increasing the flow to a satisfactory flow only gives hot water. The water coming in is at 130 degrees F. I can not change the temp of the water coming...

Symmons Temptrol Shower/Tub Handle - [ 1 Answers ]

I printed off the internet the part breakdwon to my tub/shower one-dial Symmons Temtrol kit as I am trying to stop a slow leak out oif the tub faucet. I removed the screw and cap - and I can't get the handle off - is it hyst suppoosed to pull off once the screw is removed? That is how the...

View more questions Search