Originally Posted by
atkozy
Dryer was working fine until I put in soaked clothes in it.
Soaked clothes was drying for 15 minutes. I manually Paused/Cancelled it, took out clothes to squeeze excess water out of them. Put them back into the dryer and it won't start.
Door open light turns on fine.
No LED display when selecting dryer setting and pressing On button
Took out clothes again, left door open (maybe to dry out dryer)
Don't see any water in dryer
Unplugged it overnight
Next morning, plugged back dryer, open door light still works fine
Left dryer empty, pressed On button and still no LED display. Dryer won't start
Day 3. I took apart the dryer to check faulty wiring (visual only, no Voltmeter test yet) did not notice anything. Opened up the control panel and reseated all connections and still no LED lights. System board looks fine also. Tried pressing the more, less, more, less button to run diagnostic mode, no response, no LED's. I'm about to give up and call in a service repair man.
The last time I had this dryer fixed because of a quarter shorting something out, it cost me $200. I might buy a new one if they quote me anything over $200. I saw closeouts for this model for less than $500