Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heil a.c. diagram
[ 0 Answers ]
My thermostat keeps saying change filter - what filter does it mean? Is there one in the condenser out side? I have a furnace filter that you take out wash & clean & put it back in & I do that but it does not stop the warning on the thermostat... Thanks Jan
Heil furnace keeps going out
[ 0 Answers ]
I have a heil model # NULE075AG01 I replaced the ignator a few months back because it was bad, but the new problem is after it runs for a while and heats up the house it shuts off like it should and when it's time to come back on you can hear the blower motor running but there's no heat, I can look...
Heil furnaces
[ 1 Answers ]
I am in the planning stages of having a Heil H9mvx 95% 80,000BTU two stage variable speed furnace installed in my 1300 square foot home. Will also be installing a H4A8 two stage 16 SEER condensing unit with matching coil. Is this much oversized for the climate in SC?
Heil furnace
[ 1 Answers ]
I have a heil furnace model # 867.768242 when I turn it on it lites up normaly. Then after about five minuts the burner turns off, and relites itself 20 seconds later. This action will go on repeatly over & over for twenty minutes or so. Then finally the burner will stop...
Heil furnace
[ 3 Answers ]
I have a heil furnace model # 867.768242 when I turn it on it lites up normaly. Then after about five minuts the burner turns off, and relites itself 20 seconds later. This action will go on repeatly over & over for twenty minutes or so. Then finally the burner will stop... View more questions Search
|