Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Is brass an alternative to dielectric union?!
[ 8 Answers ]
Good morning speedball, I am very clear on the theory of electrolysis and such between dissimiliar metals in solutions. But I have read that one can use brass fittings in leiu of a dielectric device. I find that hard to be true. Brass may have properties which can slightly negate the battery...
Dielectric Unions - Necessary?
[ 11 Answers ]
I have searched this site and others to find information on whether Dielectric Unions are really necessary when joining copper and galvanized pipes. The problem; I have found conflicting advice. In my own case I decided to use them after replacing galvanized for copper at the lav. But both leaked...
Water heater hook up/dielectric unions
[ 8 Answers ]
When I moved into this house the hot water heater (3 years old now, gas unit) was hooked up to the existing system with copper fittings. The whole house has copper supply lines. 1. Should I put dielectric fittings between the hot water heater and the copper lines? I know the dissimilar...
Noisy pipes
[ 2 Answers ]
Whenever I turn on my water the water pipes make a loud noise. What could it be?
Connection for dielectric nipple
[ 1 Answers ]
Which way is the best to connect copper to galvenize pipe... gal pipe to brass valve to dielectric nipple to copper..? Thank View more questions Search
|