Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Constant blower fault & coil fault messages in Nordyne modulating furnace
[ 2 Answers ]
We have continuous blower fault errors messages on IQDrive thermostadt and if we go to furnace, turn off... wait a few min... then turn back on... message Clears, furnace blower will start again and will be OK for about 2 weeks and then same error. Intermixed with this periodically are coil...
Nordyne troubleshooting codes
[ 0 Answers ]
I have a nordyne heat pump , mod. # FG6RC 080N-16B, that does not always start when the thermostat is turned on. The led light blinks 4 times. I checked and cleaned the ground. No change. If I turn the power breaker off for a few seconds and then turn it back on, the furnace starts.
Nordyne furnace codes?
[ 2 Answers ]
I have a Intertherm Nordyne Model#MMBB-056ABHR-06 gas fired furnace with "NO HEAT". It was manufactured 12/96. The electronic control board is blinking 3 times. Also the pre-blower seems to work right and the board clicks I believe properly. What could be the problem?
Nordyne LED blinkin codes
[ 5 Answers ]
Can someone give me the codes for all the Nordyne LED blinks? My furnace was blining 4 times, I replaced the igniter and now it is blinking 2 times... All the codes would be greatly appreciated - thanks, in advance. :cool:
Nordyne furnace codes?
[ 0 Answers ]
Nordyne model #g4ra072c-12 code lightblinks continiously and the blower motor will not shut off. View more questions Search
|