Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I stop leaking around the hose cuff where the hose screws in?
[ 1 Answers ]
I just installed an above ground pool. I bought hoses from Home Depot because the ones that came with the pool were too short. I had to buy the hose by the foot so the ends have the coils and not the end pieces that the factory hoses have. I bought hose cuffs to screw onto the ends and then the...
Shower Hose Leaking, removed hose pipe drips
[ 5 Answers ]
Previously it was leaking at the top where shower hose goes onto the threads of the pipe at top, I wrapped the threads with teflon tape so that now that part is dry, no leaking, but the hose continues to leak at the bottom (hand held piece). I totally unscrewed the shower hose from the pipe and see...
How to unscrew shower hose to cut the leaking part of hose
[ 1 Answers ]
How to unscrew shower hose to cut the leaking part of hose: I found a crack or tear inside shower card near to end. I've successfully unscrew the shower head, but not able to unscrew the remaining, so that I can cut the damaged part out... it looks like new and shiney, but it's very tightout...
Plumbing sweating copper pip to brass hose bibb
[ 5 Answers ]
I own a house with vinyl sidding. I have to change a hose bibb that's already sweated . How do I protect the sidding from being damaged? Thanks tony s View more questions Search
|