Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Parts for empire dv235-3sg wall heater
[ 0 Answers ]
I rebuilt my Empire DV-235-3SG wall heater last season with a new gas valve and burner assembly and it worked fine. This season, I cannot get it to work properly. Right now, the pilot lights but when I turn the knob to "on", the pilot goes out. Evidently the thermocouple is not sending the electric...
Empire wall heater will not stay on
[ 0 Answers ]
I have a empire wall heater model # gwt-35-2 . 35,000 BTU. I have replaced the thermopile with a robertshaw # 1950-001 thermopile 36" 250-750 millivolts, 2 lead type. Have also replaced thermostat with Honeywell # CT33A compatible with millivolt heat only systems.Two years ago I replaced the over...
My wall heater do not start is Empire GWT 25-2
[ 0 Answers ]
The pilot is on but when I turn on the thermostate, the burner do not star.I all ready change the termo pilot and check the thermostate look fine.I put btogeter the tow line in the thermostate but steel of.
Problem with empire wall furnace
[ 1 Answers ]
I have a 1985 vintage Empire gravity direct vent wall furnace in out cottage mode # DV-235-3SG. Once the unit runs for a while and the room comes up to temp. the burner shuts off, but the blower keeps trying to cycle on and off - it makes an electrical sparking sound which causes interfence with...
Lighting Empire wall furnace pilot light
[ 1 Answers ]
:o, Please help! I have accessed the inside of my Empire wall furnace & understand the instructions on the knob relating to startingg the pilot light. Have lit pilots of water heaters many times. My question simply is: Where is the place to place the match to get ignition? It refers... View more questions Search
|