Ask Experts Questions for FREE Help !
Ask
    jceinc's Avatar
    jceinc Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 23, 2010, 09:51 PM
    Changing installer code on a dsc 1832 alarm system
    How do you change the installer code on a DSC 1832 alarm
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Feb 24, 2010, 05:56 AM

    Hit *8 C O D E, then in Location 006, enter your new code.
    C O D E is your current code.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Feb 25, 2010, 07:03 AM

    If you don't know the code, you may have to do a Panel reset, by Hardware Default, if that doesn't work, Installer Lockout may have been enabled, and will need something like a Panel Unlocker.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

DSC PC 1832 programming troubles [ 9 Answers ]

Hi…I am currently replacing an old DSC PC 2525 home security system with a newer PC 1832. The trouble is… I am having difficulty even getting to first base programming this unit Is there someone on board who can walk me through this? This is what I have: 2 new keypads.. a pk 5501 at the...

Dsc 1832 resistor value [ 1 Answers ]

I have a DCS 1832 and I am getting intermitting open. The wires at the control panel are tightly secured. It could be a resistor problem and I am unsure of to what the resitor value should be for the zones. Can you help?

Keybus Fault on DSC PC1832 alarm system [ 1 Answers ]

Getting a keybus fault error on DSC PC1832 system. Board problem?

Connecting DSC power 1832 alarm to phone line [ 4 Answers ]

Hello - I have a DSC power series 1832 alarm system that I want to connect to a central monitoring station. I have connected it to the phne line via a RJ31X telephone jack and cord set. I set up the system to monitor the phone line such that it should report an error when the phone line is no...


View more questions Search