Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Changing belt on maytag dryer
[ 3 Answers ]
The drive belt for the drum broke. We have the front off and pulled out the old belt. We looked to see where it rides on the drum before we removed it. Now what do we do? My husband thinks we have to loose the screws that hold the drum in place and put the belt over the drum that way. The...
Maytag Performa Dryer belt change?
[ 2 Answers ]
This dryer is a little different from others. The motor is in the rear, and the front is very hard to remove. I have the top off, no problem, but can't reach the screws holding the front on. They are way down the side, and access is very limited. To remove the hinged front cover, the top screws I...
Replaced belt on dryer
[ 1 Answers ]
I replaced the belt on my kenmore dryer, it still won't start, what do I do now
How do I route my maytag performa dryer belt?
[ 1 Answers ]
I have everything apart. I replaced the motor. Now I am trying to route the belt around the drum but for some reason it has no tension. I'm assuming I'm not routing the belt correctly... View more questions Search
|