Ask Experts Questions for FREE Help !
Ask
    johnnow59's Avatar
    johnnow59 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2018, 06:42 AM
    Limit circuit shows open but switches are closed
    It's a nordyne gas pac coad shows limit circuit open ,I checked all limit and roll out switches and they are closed ,had weak control board ,replaced board ,still same problem

Check out some similar questions!

True blue 90 tech 4 furnace shows primary limit circuit open on diagnostic led [ 0 Answers ]

Burners light and blower fan doesn't kick on. Unit shuts down after 30 60 seconds

Limit circuit open [ 2 Answers ]

I have a nordyn furnace. I replace the inducer motor cause it was making a noise and would not run all the time. I also replace a limit switch that is built onto the inducer motor. This limit switch keeps triping and it throws a code of "limit circuit open or external load on "w"." I can...

Limit circuit open [ 1 Answers ]

I have an intertherm gas furnace with a limit circuit open alarm. What can I do/check to clear this alarm?

Open limit switches [ 1 Answers ]

Furnace turns on burners lite blower turns on but then shuts itself off then back on

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.