 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The elbo section of duct work in basement fell down from the duct it was connected to and previous owner had it connected with duct tape. New application of duct tape did not hold it for long. So what is the safest way to connect these two ducts or at least prop it up to the ceiling so it cannot...
I have had the fiberboard/flex duct system replaced with standard metal duct for our central HVAC system. The improvement in airflow has been very good, partly because the previous install had the flex loose with lots of tight bends. The only drawback is the increased (I assume blower) noise...
Will copper connected to galvanized create a problem? Corrosion? Is it against code? When was that code enacted? Should I change it? ewalk
What 's trhe reason of water leakage in the duct when the slope, operation of ac are allright?
I am adding an addition onto my house. The local building inspector has already told me my HVAC unit is more than adequate in size to support the addition. The old duct vents are aluminum. Can or should I use flexi venting in the new part? What are the pros and cons of these two types of vent...
View more questions Search
|
