Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Trying to replace a bryant heat pump thermostat with a Honeywell rth3100c
[ 3 Answers ]
Trying to replace a Bryant heat pump thermostat with 8 wires connected with a Honeywell RTH3100C. Instruction guide says if W1, W2, and Y were connected, contact a HVAC tech. Honeywell customer service was no help. Any ideas?
Replacing train weathertron thermostat with honeywell pro th3000 thermostat
[ 0 Answers ]
Im looking for a change over wiring diagram
Replacing Weathertron thermostat to a Honeywell RTH3100C
[ 3 Answers ]
:confused: I am attempting to replace our Weathertron thermostat with a Honeywell RTH3100C. We have a Trane heatpump system. I am having trouble with the wiring. My wires don't match the 'less common wire designations' in the manual. I have the following wires on the Weathertron: R-red T-brown...
Honeywell rth3100c Thermostat
[ 1 Answers ]
I am trying to change from a White Rogers thermostat to a Honeywell rth3100c. The old thermostat has a blue wire on X1 and a tan wire on E. Do both of these go on the E terminal on the honeywell?
Honeywell 7400 to replace a weathertron Baystat240
[ 2 Answers ]
I replaced the weathertron baystat240 with the honeywell 7400. Taped off the brown (T) cable and the rest went in their corresponding letters. After setting up the system nothing happens. It does not run. My system is a trane XE1000 Heat pump View more questions Search
|