Ask Experts Questions for FREE Help !
Ask
    Laa's Avatar
    Laa Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 8, 2007, 09:14 AM
    Goodman Furnace
    I've purchased a home where the furnace was to be replaced NEW with a Goodman Furnace. We've been given the model # GMPE 100 S4A from the seller. Anyone know if this is an actual Goodman Model - the colour is beige, not black.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Apr 9, 2007, 11:19 AM
    Looks like a good numbrer to me. 100,000 BTU with a 4 ton drive.
    jreese55's Avatar
    jreese55 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Mar 26, 2012, 05:46 PM
    I have a goodman furnace that the power vent runs for about 30 seconds and then shuts off and then the led flashes 6 times.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Furnace [ 2 Answers ]

How old is my Goodman furnace and how efficient is it? Model GUEQ80-4REVS Serial #910482720

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Goodman Furnace [ 2 Answers ]

What does A three blink code on a Goodman 80 plus gas furnace mean

Goodman Furnace [ 3 Answers ]

I have a six year old Goodman Furnace that will not kick on or even begin the start up cycle. Last year I replaced the ignitor and checked it out today and looks fine. Any obvious place I should start to determine the issue? Thanks Jim

Goodman furnace [ 17 Answers ]

I have a goodman furnace. Forced air. No a/c. I turn the power on and she starts. Thermostat is off. No wires are crossed that are visible. The pilot does not ignite but the heating element is on. No gas seems to be coming through. Any suggestions? The furnace is only a year and a half old.

View more questions Search