Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Thermostat Wiring - From Two to One Thermostat
[ 4 Answers ]
Currently my central a/c unit is hooked up to a Honeywell CT3500 Programmable Thermostat. I've noticed that the thermostat can handle heat as well as cooling. My furnace is hooked-up to an older manual thermostat. It is a simple 2 wire set-up - red & white. Could the furnace be hooked-up to the...
How many terminals needed for Fluorescent dimmer
[ 4 Answers ]
I am a mechanical engineer and going to design a electrical fluorescent dimmer. The problems what I need to know are 1) how many terminals needed? I know 3 terminals for dimmer power input (L, N, E) but don't know how many terminals for ballast (the ballast is still required for this dimmer) and...
Honeywell wiring different from old thermostat wiring
[ 2 Answers ]
I purchased a non-programmable digital thermostat to replace an analog thermostat with wiring red, white yellow and black. How do I match the wiring? HELP!!
Thermostat Wiring
[ 4 Answers ]
I am having similar thermostat problem as krich22774 had on 4/16. I installed the Honeywell RTH230B thermostat during the winter and the heat worked fine. Now when I turn on the A/C nothing happens. I have 5 wires coming from the wall. I started with the following setup: Rh-Red Rc-Blue...
Wiring the whole thermostat?
[ 2 Answers ]
Without realizing what I did I removed the old manual thermostat, and paid no attention to the wires locations on the thermostat before doing so .so I'm stuck with two yellows one red one blue one green and a black wire that's not been used ? How do I determine which wire goes where? View more questions Search
|