Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Floor Drain...
[ 1 Answers ]
SpeedBall1, Your help in the pass have been very helpful and appreciated. I got one quick question for you: I want to replace my rusted floor drain with a new plastic one, just that simple... however it looks like the old rusted 2 inch floor drain has a vent 1/2 inch pipe attached to left...
Floor Drain Help
[ 11 Answers ]
Hello: I have a house that was built around 1948. It is a two story house with a basement. In the basement the floor drain has been backing up recently. My instinct is to snake the floor drain. However, I want to understand the function of the various pipes before I begin. I have attached a...
Sewer Drain Location in New Construction
[ 5 Answers ]
Does anyone know about any rules regarding the location of the sewer drain location. For instance, min distance from a window, etc. Thanks, Peter
Raising a floor drain in concrete floor
[ 2 Answers ]
I have an old concrete floor with a newer pvc type drain. The floor slopes about 1.5" over 2' around the drain so I would like to raise the drain in order to level the floor to install ceramic tiles. I'm still going to ensure the floor slopes toward the drain just enough. I figure I need to...
Converting cast iron floor drain to shower drain
[ 3 Answers ]
I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent... View more questions Search
|