Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring a furnace thermostat to manually operate the furnace fan
[ 2 Answers ]
I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?
Goodman Furnace
[ 2 Answers ]
How old is my Goodman furnace and how efficient is it? Model GUEQ80-4REVS Serial #910482720
Gas Furnace needs reset button pushed to work
[ 1 Answers ]
1983 - Natural Gas - Rheem Furnace Model #RCDA-100C-ER Originally the furnace blower would not come on. I called a technician who pushed a reset button. He mentioned something about the air fuel mixture and that a gust of wind could have tripped the furnace off. Pushing the button worked for...
My Furnace won't kick on even after I've manually primed it 10 times
[ 1 Answers ]
I need to know why I can't seem to keep the furnace running I prime it it stays on for 2 minutes then shuts down even before the blower starts . What's up with the red light near the reset button
Must reset furnace breaker to activate
[ 3 Answers ]
I installed a ritetemp digital thermostat and appear to have 2 problems. 1) I’m not getting any ac to the thermostat, so it does not activate the furnace. I know I need to check the 24v transformer and common per the other threads. But, if I go to the circuit breaker panel and reset the furnace (80... View more questions Search
|