Ask Experts Questions for FREE Help !
Ask
    wun_bun's Avatar
    wun_bun Posts: 47, Reputation: 1
    Junior Member
    		  
    #1

    Sep 18, 2009, 08:29 PM
    Foam remains in washer
    Hi, I have a 10 year old GE top load washing machine.

    Every time after it's finished washing and spin-drying I'd see quite a bit of foam remaining insie, so I have to rinse again.

    The water drains very well, and the pipes in the building have just been cleaned. The problem started about a year ago after the washing machine had been left unused for one year. We only use it once a week.

    I don't mind doing a rinse every time, but I am just worried that it might cause some leakage or damage etc. to the pipes or something, because I live in an apartment building. Any suggestion would be much appreciated. Thanks.
    wun_bun's Avatar
    wun_bun Posts: 47, Reputation: 1
    Junior Member
    		  
    #2

    Sep 21, 2009, 08:37 AM

    Actually maybe I should ask a different question. If there were leaks in my washing machine or pipes, are there symptoms that I can see easily (I am not seeing any water around the machine). Thank you!
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #3

    Sep 21, 2009, 06:10 PM

    Does the building have a water softener? If so, was it installed around the time the problem started? I know when I shower with soft water, I feel I can never get the soap off me!

    Did you change detergents around the time the problem started? Most manufacturers have gone to "concentrated" detergent that call for about half the amount as before. (Plus, you can use about half of what they say and still get good cleaning) You might try a smaller amount of detergent.

    Hope this helps,
    WallyH
    wun_bun's Avatar
    wun_bun Posts: 47, Reputation: 1
    Junior Member
    		  
    #4

    Sep 22, 2009, 08:40 PM
    Thanks WallyHelps. Actually the other residents that I have talked to don't seem to have this problem so don't think it has to do with the water softener, and I haven't changed the detergent.

    But you are right. Using less detergent may be my solution for now.

    Thanks.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Disposition of remains [ 2 Answers ]

Can a surviving spouse (in Ontario, Canada) change the disposition of the remains of a deceased spouse if other clearly stated wishes were formalized in a will? (ie deceased wishes were to be buried, surviving spouse wishes to keep remains in residence).

Log in name remains on log on screen [ 3 Answers ]

Hi, Can any one tell me how I can delete my email address which is my login name from the log on screen on orange webmail? I use a PC others also and don't like evey one having acccess to my private email details. Can any one tell me in simple terms how to delete this screen history? Thanks...

Piece of tooth still remains [ 1 Answers ]

I had a tooth removed and there is what looks like a piece of the tooth still there. It is sharp and sensitive. Do I need to go back to the dentist?

Gas valve remains on [ 3 Answers ]

I have a coleman evcon gas furnace mod.7970c856. I have problems with gas valve staying on after thermostat kicks out. It also over heats without limit switch kicking it out.how can the solenoid in the valve still have power? Its not the valve or the thermostat because both have been replaced 3...

CPU Usage Remains at 100% [ 3 Answers ]

Recently, I discovered the CPU usage on one of my PCs will not fall below 100%. I've attempted everything I can think of to resolve the issue, including: - Running Ad-Aware SE - Performing an online scan from Trend Micro - Performing an online scan from Panda Software - Running Registry...

View more questions Search