|
|
|
|
New Member
|
|
Dec 26, 2008, 06:11 PM
|
|
Ward floor furnace
I have ward floor furnace I remplace the gas valve and the thermocuple pilot is on but
Turning the burning on what can be the problem
|
|
|
Heating & Air Conditioning Expert
|
|
Dec 26, 2008, 06:16 PM
|
|
Many items.
The gas valve? Is it the correct valve for the unit? Are you sure?
Did you wire the valve correctly? Did you dubble check?
Did you turn the new gas valve lever to the on position? Believe it or not I have seen that happen before. Is the thermostat turned all the way up causing the thermostat to call for heat?
What was the original problem?
What is the EXACT model number of the unit?
|
|
|
New Member
|
|
Dec 26, 2008, 06:22 PM
|
|
I have ward floor furnace model#570 edr
I remplace the gas valve also the thermocuple
The pilot is on but is not turning I remplace the thermocuple Two times it work only 4or 6timesso I don't kow what to do
|
|
|
New Member
|
|
Dec 26, 2008, 06:25 PM
|
|
Yes the valve is new I got the valve from a apliances place so thast what igot
|
|
|
New Member
|
|
Dec 26, 2008, 06:29 PM
|
|
The exact model# is 570 edr
|
|
|
New Member
|
|
Dec 26, 2008, 06:32 PM
|
|
The exact model# is 570 edr
BTU per hr 57000
BTU per hr 39900
|
|
|
New Member
|
|
Dec 26, 2008, 06:40 PM
|
|
You got the model # already
|
|
|
New Member
|
|
Dec 26, 2008, 06:49 PM
|
|
My furnace model # is 570 edr
But is not turning on new gas valve and new thermocuple only my pilot is on
|
|
|
Heating & Air Conditioning Expert
|
|
Dec 26, 2008, 06:53 PM
|
|
I have looked through all my old books hoping to find your furnace and a diagram. No luck here. Sorry.
|
|
|
Heating & Air Conditioning Expert
|
|
Dec 26, 2008, 06:54 PM
|
|
Is it possible for you to take pictures and post them here of the valve and wiring?
|
|
|
New Member
|
|
Nov 17, 2010, 10:15 PM
|
|
I also need a new valve for the Ward furnace - where can I buy one?
Thanks
Hermann
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Floor furnace
[ 1 Answers ]
I took the thermostat under the house and connected to the gas valve and try to start it from there and the gas line is fully open but when I turn the heat on (you could hear a click noise) and the pilot goes out and no I did not hear or smell any gas. Thank you for you assistance
Floor furnace
[ 1 Answers ]
I have a floor furnace, I light the pilot and it stays on but when I raise the temp. on the thermostat the pilot light gos out , what could be wrong
Floor furnace
[ 1 Answers ]
I live in Baton Rouge, Louisiana in a house built 1917 circa. Heat is by a large gas floor furnace in a hall that connects the dining room, a bathroom, and two bedrooms. In the living room is a gas log and in the kitchen is a room air/heating unit. We've lived there since 1997 and the floor...
Old Floor Furnace
[ 2 Answers ]
I have a house which was built in the early 1950's. It had one of those hallway floor furnaces which has long been removed. There is an electrical switch in the hallway which no one knows what it was for. Could this switch have been to operate the old floor furnace.
P.S. If old floor furnace...
View more questions
Search
|