Ask Experts Questions for FREE Help !
Ask
    troizana's Avatar
    troizana Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 18, 2017, 04:29 PM
    Error message 21 filter wasn't clogged suspect hardware went through machine
    Error f21 message on machine. Checked white filter as per video. Nothing in it. Machine still gives message. Suspect some hardware from pockets went through machine. What is my next move?
    talaniman's Avatar
    talaniman Posts: 54,327, Reputation: 10855
    Expert
    		  
    #2

    Dec 18, 2017, 05:06 PM
    What machine? What appliance? At least the brand and model number,or a better description. Confirm washing machine please..
    talaniman's Avatar
    talaniman Posts: 54,327, Reputation: 10855
    Expert
    		  
    #3

    Dec 18, 2017, 05:13 PM
    What machine? What appliance? At least the brand and model number,or a better description. Confirm washing machine please.

    Reset machine. Unplug then plug it back in after a few minutes. Let us know what happened.

    Reset machine. Unplug then plug it back in after a few minutes. Let us know what happened.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Dec 18, 2017, 05:54 PM
    This is a washer? Google f21 error codes, all relate to the pump.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite washing machine error message [ 0 Answers ]

Hi, My Sears Kenmore Elite washing machine is only about 2 years old and it recently started giving me an error message during the wash cycle of LD. I know it means LID because when it does this it stops the cycle and beeps continuously until I go over and the lid is unlocked so I open the lid and...

Error message that may be related to hardware [ 1 Answers ]

hi, I realised that my second hard drive may not be sitting well in my cpu casing, so I picked up another older but bigger and spacious casing and transferred my component into it, everything seemed fine and when I powered on it worked, well no biggie. I have 2 HDD, 1x80gig is dual boots both XP...

Found new hardware error message [ 1 Answers ]

Found new hardware error message pops up every time the computer is turned on Everything seems to be working OK But on device manager check up One problem - under network adapters one is highlighted yellow And no name or info will display ( says unknown device) Also when I try to remove...

View more questions Search