Not your question?
Ask your question
View similar questions
Check out some similar questions!
GFCI trips?
[ 11 Answers ]
I have aan outdoor outlet on the patio. On the inside of the wall of the basement (about 6-7 feet away)there is a GFCI outlet. When I plug my Greenlee GT-10 GFI tester into the outlet on the patio it trps the GFCI outlet inside the basement. Slso, when I plug the tester into the inside...
No power to 7 outlets, breaker stays on, & tester reads open neutral
[ 5 Answers ]
This is an 1968 house with AL wiring. All of the outlets are new and AL compatible with anti-oxidizer paste. Starting with the first box, I pig tailed each neutral (white) wire together to see if I had a bad outlet. I went from box to box and when I came to the last box, the tester still read open...
Gfci trips
[ 3 Answers ]
I have a small fountain motor (not submersible) plugged into a gfci and After working fine for a year it now trips after about 10 minutes. This is What I have tried so far. 1. I plugged a lamp into the same gfci and it stayed on for over 3 hours Until I turned it off - didn't trip. 2....
Outdoor electrical outlet keeps tripping gfci outlet
[ 3 Answers ]
Until just recently my christmas decorations would light up when we plugged them into the outdoor electrical outlet. Now when we plug it in the gfci outlet in the garage keeps getting tripped and the lights won't come on. Even when we reset the gfci, once we plug in the chord it gets tripped...
Voltage tester gives false positive reads when line is not hot
[ 3 Answers ]
Pro did my rough in. I'm installing outlets, switches, etc Using $20 no contact voltage tester - with plastic tip that beeps/lights when line is hot. I get beep/light even if line is absolutely, definitely dead? For example: 12/3 wire direct from panel to switch box Nothing between panel... View more questions Search
|