Search:
Type: Posts; User: xliu63
Search:
Search took 0.00 seconds.
-
Thanks. I am going to try. After I drop the pan, is there any specific thing I should look for?
-
Hi, all,
I just bought a 2003 Jetta without going through mechanical checkup. The car has quite a few missing parts and I thought I can fixed it. However just after three days the car developed more...
-
There is a temperature probe tied to the heating element. The probe has diameter close to the heating element, at end of the probe is a thin wire 1/16 inch linked to the dial.
-
Yes. Maybe a 1/16" thermostat wire
-
I think I did not spell out an important fact. The heater works, it heated water to boiling at very low setting. The dial could not set temperature.
I opened up the dial part, it is a disc, on top...
-
no. It does not have printed circuit.
Here is the picture of the unit -
More Pictures
I think you can figure out how it works by looking at this picture.
Thanks.
-
Hi,
I bought a Buchi Rotavapor. It is a piece of scientific equipment to get solvent out. It has a heating bath. The temperature control malfunctioned. I wonder any expert here could point me the...
-
Thanks all the professionals for their professional answers.
After thinking about the issue, I left the water run and about 4 hours later, the blackline flow stopped, and the tank was full. So the...
-
Thank so much.
The model number is PUR-TEK
Model RO-TEM-5SV-W1
It is a 5 stage reverse osmosis system.
-
Hi, experts,
I just purchased Watts Premier R.O system. After installed, I saw not much water coming out of faucet and there is steady flow to the black tubing to the sink. I just started the...
-
Hi,
I need to design a poster with Indesign CS3. I have question regarding export pdf file.
What is best output options to send file to printing shop with best possible resolution?
I use non...
-
After struggled with the problem on and off for about a year, the problem now become so severe. I searched the internet and decided to change the starter.
I bought a used one for $35. The starter...
-
Hi,
It is still my Toyota Corolla 1997. It has been having starting problem and seems related to the fuel line problem. I did not do good job in maintaining the car. It has close to 150k miles. Last...
-
Thanks all for help. I kind of settled on fuel injection issue. The fluel line may be too dirty. When I push the gas padle many times the starting is easier. I put in one bottle of fuel injection...
-
The corolla was 1997. It has 160k on it. I did notice higher pressure built up when refilling the gas tank. I have Advanced auto parts checked the starter, the result was a good starter. He suggested...
-
Hi,
I have read several postings on starting problem. My problem is similar to some postings.
I stopped Advanced Auto Part. The test showed good starter. But many times I need to crank 20 or 40...
-
Since no professional answered my questions, I would like to answer some of them myself and there may be some lessons others can learn from my mistakes.
1. I should have added the stabilizer...
-
Just want to conclude my own question,
The metal clip that secured the motor fell off apparently during my move. After took everything apart, I found the clip, put it back and all problem...
-
Hi,
I bought a house with a swimming pool. The pool has salt generator. I just got the pool up working. The pool chemistry is correct now. I was puzzled by Aqua Rite salt generator and not sure it...
-
Hi,
As a new owner of a house with a pool, I have lots of question to ask,
1. I just filled the pool with well water, the water is kind of green. What is reason and what is cure? I added two...
-
Hi,
As I said in my previous question, I finally got the well working. Initially the water was quite dirty and now it cleared up but still has strong sulphur smell. Could anyone tell me the...
-
Hi,
I bought a tankless waterheater to replace one waterheater with tank. The original breaker was 30 amp and the tankless requires 60 amp breaker and No. 6 gauge wire.
My question is if I do...
-
Hi,
After lots of diggings, I called a well guy. He came and parked the truck in front of the house. I tried to describe what I did. He said your well is right there, pointing to a rusted box...
-
Hi,
I bought a house with a staple. Inside the stable was a computer well setup. I thought I found the well under a deck outside the house. It was a 2 meter cube. Last weekend I went down the cube...
-
Hi,
I posted a question regarding whirlpool dryer (GEW9868KQ0) noise and have not yet received answer.
I just opened the dryer up and found the problem. The motor was not fixed. When motor...
-
Hi,
I asked the submersible pump question a while ago and speedball1 helped me a lot.
I have additional question now.
I have located the well. Can you tell me the steps to pull the pump...
-
Hello,
I read several posts on this forum and tried to follow applguy's suggestion.
I have a new Whirlpool Senseon dryer we purchased two years ago for the potential new house. Finally we moved...
-
Hi,
I bought a house with a really dirty pool since it has not been circulated for about a year with lots of algae growth. I already get most of the leaf out. I went to a few pool supply stores...
-
Dear Tom,
Thanks for your prompt reply.
The pump is a submersible. The voltage is 220.
I am in St. Pete area. We are not far.
Sherwood
-
Hi,
I bought a house with a well. And the well does not seem to function.
Is there a way to diagonose the pump problem? I can see the voltage is applied to the pump. The pressure trigger is at...
|