Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: METT

Search: Search took 0.00 seconds.

  1. Answers
    1
    Views
    1,971

    Yes, one wire to Rh and one wire to W. If you...

    Yes, one wire to Rh and one wire to W. If you only got 2 wires, black and white doesn't matter.
  2. Question: Noma Thermostat

    by METT
    Answers
    9
    Views
    53,087

    You may also call them at 1-888-goto-upm to...

    You may also call them at 1-888-goto-upm to request a copy
  3. Answers
    5
    Views
    5,488

    It will turn on the fan for several minutes (5 ?)...

    It will turn on the fan for several minutes (5 ?) if there is no activities in the past hour.
  4. Answers
    3
    Views
    4,224

    You may also set 2 programs to same temperature...

    You may also set 2 programs to same temperature but slightly different time. For example P1 at 9:00am, P2 at 9:20am. And P3 at 6:00PM, P4 at 6:30pm.
  5. Answers
    5
    Views
    5,488

    I guess if you set it to fixed span (+/-0.3C) it...

    I guess if you set it to fixed span (+/-0.3C) it will tends to overshoot (particularly if the climate is still not too cold). You may try to set it to 5 cycles/hour mode and it may track the...
  6. Question: Cannot not heat

    by METT
    Answers
    3
    Views
    966

    You may also try to move the System slide switch...

    You may also try to move the System slide switch from HEAT back to OFF and then HEAT again to see if it works. Open the unit and check if any wire (especially R and W) is loose.
  7. HE setting is needed for electric furnace. HG is...

    HE setting is needed for electric furnace. HG is for gas furnace which will turn on the fan by itself.
  8. Question: Thermostat problem

    by METT
    Answers
    1
    Views
    530

    Set to HG if your furnace will turn on the fan by...

    Set to HG if your furnace will turn on the fan by itself (usually after a slight delay)
    Set to HE if you furnace will not turn on the fan and need the thermostat to specifically turn it on also.
  9. Answers
    5
    Views
    1,255

    a. No b. Yes c. No d. Depending on models

    a. No
    b. Yes
    c. No
    d. Depending on models
  10. Question: Noma thermostat

    by METT
    Answers
    2
    Views
    3,087

    '4' is probably same as RH. You can try using the...

    '4' is probably same as RH. You can try using the jumper to connect Rc and Rh to see if it work.
  11. Answers
    3
    Views
    4,393

    I think this thermostat does not support heat...

    I think this thermostat does not support heat pump + furnace.
  12. Answers
    2
    Views
    2,388

    Also different day of week can have different...

    Also different day of week can have different program setting. So check the program for the weekday in question to see if it is what you want.
  13. Answers
    6
    Views
    7,494

    If you still remember the where the 4 wires were...

    If you still remember the where the 4 wires were connected to the White Roger thermostat, take note of the name of the terminals the 4 wires are connected to. That may help as sometime the colour of...
  14. Answers
    5
    Views
    4,924

    Probably the 2 leads of the temperature sensor...

    Probably the 2 leads of the temperature sensor (probably blue colour) sticking out at the bottom back of thermostat(when you removed it from wall) is shorted together. Gently separating the 2 leads...
Results 1 to 14 of 14