Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: hvac1000

Search: Search took 0.32 seconds.

  1. Question: Heating

    by hvac1000
    Answers
    1
    Views
    346

    I believe you have a thermocouple problem.The...

    I believe you have a thermocouple problem.The pilot flame hits the thermocouple which in turn generates a very small electrical current and this is the current that allows the solenoid in the valve...
  2. Question: Friedrich ac

    by hvac1000
    Answers
    2
    Views
    598

    Bob there are just a few different ways a knob of...

    Bob there are just a few different ways a knob of this type can come off. One is as you know is it just pulls off the other is if the knob has a set screw that is usually just a flat blade screw...
  3. Question: What size unit?

    by hvac1000
    Answers
    6
    Views
    583

    Insulation on walls? Insulation in attic space?...

    Insulation on walls?
    Insulation in attic space?
    Kind of floor?
    Doors insulated?
    Average temperatures in your area?
    Is this just for storage above freezing or is it to work in and maintain 65-70...
  4. Answers
    1
    Views
    377

    I hope by mow you have turned off the indoor...

    I hope by mow you have turned off the indoor circuit breaker that feeds the outside condensing unit. Now you can call for on site service since this sounds like a severe electrical short and will...
  5. Question: AC efficiency

    by hvac1000
    Answers
    6
    Views
    600

    Systems are designed to operate with all the...

    Systems are designed to operate with all the supply and return ducts being open and not obstructed. That is all there is to it.
  6. Answers
    2
    Views
    430

    Most residential systems have a direct waterline...

    Most residential systems have a direct waterline connection to the main waterline servicing the home and unless a special pressure DROP differential valve has been installed the broken pipe will flow...
  7. Answers
    1
    Views
    1,330

    The only real way to get an exact answer is to...

    The only real way to get an exact answer is to contact the contractor who sold and installed your Payne system all else is just guess work since the factory warranty can be extended by the contractor...
  8. You really do not want to do that. Get the...

    You really do not want to do that. Get the correct size or one a bit larger.
  9. Question: e1ra030s06d size

    by hvac1000
    Answers
    1
    Views
    445

    Not a known model number but it could be a...

    Not a known model number but it could be a 30,000BTU or 2 1/2 ton unit by the number you supplied and that is a large piece of guess work. Sorry but that is the best I can do.
  10. I agree with you completely mygirlsdad77. Thank...

    I agree with you completely mygirlsdad77. Thank you for all your help on the boards. It gets harder every day for me to answer just one or two questions anymore since I get tired real easy.
  11. The answer is in your school book. Pressure...

    The answer is in your school book. Pressure regulator is the answer.
  12. Answers
    1
    Views
    563

    Safety/Inspection Notice...

    Safety/Inspection Notice
  13. The motor in the unit will have a ID...

    The motor in the unit will have a ID plate/sticker of some type usually located around the belly of the motor. The information you are looking for is located on this plate or ID sticker and you...
  14. Answers
    5
    Views
    455

    Always turn off all power servicing all...

    Always turn off all power servicing all appliances that operates all devices within any electrical circuit that is attached to the unit in question. In other terms turn the power off to as many...
  15. Answers
    2
    Views
    1,014

    Here is a link to a good picture of one. ...

    Here is a link to a good picture of one.


    BestBuyHeatingAndAirConditioning.com OEM Replacement Furnace Burner Target Assembly (Nordyne, Intertherm)
  16. Answers
    2
    Views
    1,014

    I know what you need but I have not been able to...

    I know what you need but I have not been able to buy one for service work for years now. What I had done on the last plate I needed to replace was to get one made by a local black smith shop. He...
  17. Answers
    2
    Views
    455

    I have no quick answer but here are a few to...

    I have no quick answer but here are a few to think about. It could be the thermostat doing what is called short cycling. It could be the fan control on the furnace that has gone out of adjustment....
  18. Check your drive belt under the machine first. It...

    Check your drive belt under the machine first. It should not be loose or with a lot of black powder around the area.

    NOTE Turn power off first.
  19. I cannot understand the reason you want to do...

    I cannot understand the reason you want to do what your thinking of doing to start with. It seems you have a short circuit that is causing the fuse/breaker to trip and I would be finding out what...
  20. Question: Blower motor

    by hvac1000
    Answers
    1
    Views
    392

    Replace the motor along with the run capacitor...

    Replace the motor along with the run capacitor for the new run motor. I always suggest a new run capacitor since it is false economy otherwise to depend upon that old capacitor. Make sure you get it...
  21. Answers
    1
    Views
    358

    Replace outdoor coil/condenser assembly, copper...

    Replace outdoor coil/condenser assembly, copper line set and indoor coil assembly. This will make the refrigerant system all new and should take care of any contamination problems.
  22. Answers
    2
    Views
    1,376

    There are tons upon tons of R-22 readily and...

    There are tons upon tons of R-22 readily and available anywhere quality refrigerants are sold. The product on the market is all recovered and has been brought back to actually a better quality then...
  23. Looks like you need to face the facts of your...

    Looks like you need to face the facts of your situation. It Is Time To Move because they are not going to make you happy no matter what they do. They have lied to you for starters and it just gets...
  24. Answers
    1
    Views
    426

    I have a Beckett. I changed the eye. I push the...

    I have a Beckett. I changed the eye. I push the reset button, it goes on, I get a puff of smoke and it goes off. What do I do?

    Do you have oil?
    Did you bleed the oil line to remove the air?
    Did...
  25. Revisit your wiring since the humidifier is only...

    Revisit your wiring since the humidifier is only supposed to operate when the furnace blower is operating in the heat mode only.
  26. Answers
    5
    Views
    1,071

    It seems the spread here ( T in = 48.2 f, Tout =...

    It seems the spread here ( T in = 48.2 f, Tout = 54 f,) is quite low. You only have 6.2 degrees of spread or TD= Total Differential on your evaporator setup. Setting that aside for a minute. I...
  27. Answers
    5
    Views
    1,071

    From here it looks like the liquid refrigerant...

    From here it looks like the liquid refrigerant coming back from the evaporator is the problem. Usually by the time the liquid refrigerant has passed through the evaporator it has turned into a vapor....
  28. Question: Is this safe?

    by hvac1000
    Answers
    5
    Views
    545

    The units are basically designed to run all the...

    The units are basically designed to run all the time so as long as it intake and supply ducts/registers are open you should be fine letting it run all the time.
  29. Answers
    5
    Views
    393

    That is just about impossible from where I am...

    That is just about impossible from where I am since the prices around the country are all different depending upon where you live. You might call a few different company's in your area and find out...
  30. Answers
    4
    Views
    966

    Your posts I'm trying to locate a Honeywell Fan...

    Your posts
    I'm trying to locate a Honeywell Fan Limit Switch Part No L4064A 1347 5, 8" in length and 40 degrees F Ambient, the replacement equivalent.

    My post back to you and I helped you find...
  31. Answers
    5
    Views
    393

    Could be air in the system or as previously...

    Could be air in the system or as previously mentioned a temperature or control for the temperature set to high or defective.
  32. Answers
    3
    Views
    554

    If you have fuel,ignition,fuel spraying out the...

    If you have fuel,ignition,fuel spraying out the nozzle, and spark at the ignition end of the electrode it has to light so something is still missing.

    Before I go any further since you have been...
  33. Answers
    3
    Views
    554

    I've changed nozzle.I've cleaned the eye.checked...

    I've changed nozzle.I've cleaned the eye.checked the electrode adjustment and checked the spark on the transformer.. can't find anything wrong but it still won't light

    Did you check to be sure you...
  34. When these show up (ID COIL TEMP SENSOR and FURN...

    When these show up (ID COIL TEMP SENSOR and FURN TEMP LIMIT OPEN) it usually means one of those controls are defective or have gone out of spec. When the sensor or limit opens it causes the blower to...
  35. Buy another correct thermostat for your...

    Buy another correct thermostat for your application then separate the two on one thermostat and wire it up to the new wiring from the other unit.
  36. Answers
    4
    Views
    966

    Check this out. A further search on this site...

    Check this out. A further search on this site could also help to find you the part



    Honeywell Fan Limit Switch Part No L4064A 1347 5 | eBay
  37. Hi: I'm not sure if this is the correct forum...

    Hi:

    I'm not sure if this is the correct forum so please excuse me.

    I replaced the burner infinite switch (from Sears) on my Kenmore electric stovetop two months ago since turning it on was not...
  38. Answers
    6
    Views
    1,331

    Here is a web site for you. If anyone has...

    Here is a web site for you. If anyone has something for that 1960 era furnace they will. They show a gas valve replacement and a motor for your unit. Call them for parts. If it were me I would not...
  39. Answers
    6
    Views
    1,331

    No valve of that number listed in all the info I...

    No valve of that number listed in all the info I have. Post brand and model number of valve and the brand and model number of the equipment it is on and I will check from there.
  40. Answers
    2
    Views
    521

    There is no reason a new unit should need...

    There is no reason a new unit should need refrigerant (freon). Usually it is added only if there has been a repair done and a new unit should not need any repairs.
  41. Answers
    1
    Views
    409

    Take a minute of you time to help us help you. ...

    Take a minute of you time to help us help you.

    The EXACT brand and model numbers go a long way in helping us understand just what kind of equipment you are having a problem with.

    The type of...
  42. Answers
    3
    Views
    466

    Something is wrong with the install of those...

    Something is wrong with the install of those furnaces. You might have a restricted return among other things. Get a good contractor and have them look over your duct work because losing all those...
  43. Answers
    2
    Views
    775

    Many boiler systems are wired off the main burner...

    Many boiler systems are wired off the main burner control to maintain the boiler water temperature. In other words the boiler will stay at lets say 160-180 degrees at all times weather the thermostat...
  44. Answers
    1
    Views
    322

    Try cleaning the flame sensor.

    Try cleaning the flame sensor.
  45. Answers
    2
    Views
    994

    Dead link

    Dead link
  46. Answers
    2
    Views
    994

    The thermostat could cause a problem but the fan...

    The thermostat could cause a problem but the fan control that is built on the circuit board or the sensor for fan control can do the same thing. Intermittent problems are always the most difficult to...
  47. There is a end switch in that Honeywell zone...

    There is a end switch in that Honeywell zone valve. They are usually bad or good but I would check it out to make sure it is tight in the valve switch assembly area and not moving around which would...
  48. Answers
    13
    Views
    1,022

    There was probably a spider web in the orifice....

    There was probably a spider web in the orifice. They are very hard to see. I had a hard time years ago believing that a spider could be so small to fit in that hole but it is true. Hopefully you got...
  49. It seems you have replaced everything but the...

    It seems you have replaced everything but the thermostat. Buy a CHEAP heat only thermostat and disconnect the old one. Then run the wires by jumper if necessary to the new thermostat. See if that...
  50. Question: New thermostat

    by hvac1000
    Answers
    3
    Views
    384

    If it is a standard 2 wire thermostat for...

    If it is a standard 2 wire thermostat for Millivolt control there are a few at the link below. You will probably not find the exact one you are looking for since it is probably obsolete. It does not...
Results 1 to 50 of 500