Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: jkohan

Search: Search took 0.00 seconds.

  1. Ok, I finally got to work on this today. Yes I...

    Ok, I finally got to work on this today. Yes I get decent pressure (but probably not the best) at the dishwasher point when I do what you asked. I thought that I may have over soldered the tee...
  2. I tried to shut it off at a valve, but the stop...

    I tried to shut it off at a valve, but the stop valve let a trickle through. So I then shut it down at the main line... after the install I turned on the stop valve then turned on the main.
  3. Answers
    3
    Views
    491

    You may have to initialize the disk so windows...

    You may have to initialize the disk so windows will recognize it. Doing this is easy, but will erase everything on the drive that you want to add.

    Right click on my computer... click on manage....
  4. Answers
    1
    Views
    458

    That's bad... Try to go into the bios and see...

    That's bad...

    Try to go into the bios and see if the bios recognizes any of the drives. Look for the Dell splash screen when the laptop starts up. Look for the option to go into the setup. ...
  5. Answers
    3
    Views
    890

    I know I am new, but I wanted to poke around here...

    I know I am new, but I wanted to poke around here for a little bit...

    NTFS stands for New Technology File System. It is the file system that works best with windows 2000 NT and above. (really...
  6. Strange supply pressure problems after installing dishwasher

    This one has me completely confused. I installed a dishwasher in an island setup across from the main sink in the kitchen. I have added 1/2 inch copper piping from my hot water line under the...
Results 1 to 6 of 6