Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: minibike6969

Search: Search took 0.01 seconds.

  1. Answers
    3
    Views
    108

    Does the timing belt drive pulley and camshaft...

    Does the timing belt drive pulley and camshaft pulley marks need to be lined up when setting the timing?
  2. Answers
    3
    Views
    108

    Ignition issue

    I have a 96 honda civic and wanted to know when reseting ignition timing does the pcm plug need to have a jumper wire to set timing?



    ...
  3. Answers
    3
    Views
    99

    No it's a chinese 90cc complete engine version 6

    No it's a chinese 90cc complete engine version 6
  4. Answers
    3
    Views
    99

    Clutch problems

    I have a 90cc 4 stroke semi-auto engine and need help to adjust the clutch so that the engine is not braking when I release the throttle.
  5. Question: Carburetor

    by minibike6969
    Answers
    1
    Views
    159

    Carburetor

    I have a pz26 carburetor with a port on the choke side of carb just above the mounting end of carb not sure what connects to. PLEASE HELP49139
  6. Question: Stator test

    by minibike6969
    Answers
    1
    Views
    158

    Stator test

    How do I test a 6 coil 4 wire/plus ground stator? Wire colors-blu/wht,blk/red,yel,wht and green.
  7. Answers
    1
    Views
    239

    Gameport connector to usb adapter

    I have a 15 pin connector wire colors (red,blue,yellow,white,purple,gray,brown,orange,and green) that I want to change to a usb connector (red,black,white,green).so I'm not sure what wire to connect...
  8. Answers
    2
    Views
    366

    Tail/stop light wiring problem

    I'm adding a three wire ( red,blue,brown) tail/stop light to my pocket bike with some problems. The problem I am having is when I have the lights on my brake does not work,but when I turn them off...
  9. Answers
    3
    Views
    320

    Small engine does not start

    I have a 49cc 2 stroke engine that will not start. I have a good spark,new carb,and spark plug is wet,so fuel flow is good. Also it will start some times but after that it does not start anymore....
  10. Answers
    1
    Views
    257

    Cooling system problem

    My car is loseing cooling fluid,but there is no leaking fluid and the car does not overheat,but I have to always add water to raditor. PLEASE HELP
  11. Answers
    2
    Views
    326

    HOW TO WIRE A (DK-PMB50) power module

    Hi I'm trying to build a small electric cart using parts from an old power chair,but I'm stuck at how to wire the power control module. What I mean is where and how to wire in the throttle wires to...
  12. Answers
    2
    Views
    320

    Pressure washer engine problems

    I have a craftsman pressure washer and the problem is when I start it with choke on and it starts but soon as I open the choke it cuts off?


    ...
  13. Answers
    7
    Views
    572

    Replaced open circuit relay and pump still not...

    Replaced open circuit relay and pump still not coming on so now where do I look for the problem
  14. Answers
    7
    Views
    572

    Found the problem was the circuit opening relay

    Found the problem was the circuit opening relay
  15. Answers
    1
    Views
    338

    Rectifier help

    I have a pocket bike that I replaced the engine on to a 110cc engine,but I can't find the right spark plug engine #(KN152FMH-2) so before I changed engines the rectifier was setup as ( top left...
  16. Answers
    1
    Views
    378

    Throttle cable help

    I have a PZ22 carb that came with no throttle cable so bought a cable and now I do not understand how to install the cable, this is way different then a throttle lever engine.so please anybody that...
  17. Answers
    7
    Views
    572

    The EFI relay is the fuel pump relay

    The EFI relay is the fuel pump relay
  18. Answers
    7
    Views
    572

    Fuel system problems

    I have a 96 toyota tacoma with fuel pump problems I've replaced the efi relay,fuel filter, and the fuel pump.so after all that the fuel pump is not coming on when the key is turned on. I used jumper...
  19. Answers
    6
    Views
    562

    Yeah they were wired in series,but not anymore...

    Yeah they were wired in series,but not anymore now they wired the right way and working but the one I have to replace so thanks for the help.
  20. Answers
    6
    Views
    562

    I didn't wire them they were already wired when...

    I didn't wire them they were already wired when the house was bought
  21. Answers
    6
    Views
    562

    Recess lighting problem

    I have four recess lights wired in series and none of them will work. I've replaced the dimmer switch and still nothing,also I've bypassed the switch and connected the line wire to the load wire and...
  22. Answers
    3
    Views
    395

    OK thanks

    OK thanks
  23. Answers
    3
    Views
    395

    Kick start engine

    Hi does a kick start engine need to have a starter relay solinoid ?
  24. Answers
    8
    Views
    596

    I also replaced the 49cc engine with a 4 stroke...

    I also replaced the 49cc engine with a 4 stroke 110cc kick start engine and do I need to have a starter relay solanoid for the kick start motor?
  25. Answers
    8
    Views
    596

    Here are some pics of my wire harness sorry 4 not...

    Here are some pics of my wire harness sorry 4 not in focus
  26. Answers
    8
    Views
    596

    I understand, but if I had all that info I would...

    I understand, but if I had all that info I would not be on this web site asking 4 help
  27. Answers
    8
    Views
    596

    Pocket bike wiring diagram

    I've been looking everywhere for a complete wiring diagram for a gas pocket bike, but found nothing. So if anybody can help me with info to a web site or if anybody knows the wiring system of a...
  28. Answers
    1
    Views
    400

    Water depenser problems

    I have a WHIRPOOL 26 cu ft refrigfator GOLD SERIS (model # WRF736SDAM11) that the water depenser takes 3min 30sec 2 fill a 16oz jar. The filter has been replaced and still no better.PLEASE HELP
  29. OK 2 sum everything up I'm 2 use a 15amp 240volt...

    OK 2 sum everything up I'm 2 use a 15amp 240volt breaker,and a #12 awg wire. Now to install the two hot wires one hot wire goes to the white wire and the other hot wire goes to the 3speed switch,and...
  30. So I need to run a ground wire from the braker...

    So I need to run a ground wire from the braker box to the motor
  31. On the motor diagram it say one wire to the white...

    On the motor diagram it say one wire to the white wire now with a switch would I run the other hot wire to the switch?
  32. Do have a white wire and a black wire for the hi...

    Do have a white wire and a black wire for the hi speed
  33. I'm sorry had to call granger to the right...

    I'm sorry had to call granger to the right diagram the motor I have is #4m101bg48903 now how would I wire the two hot wires and what size wire
  34. Understand nothing has been done am just asking...

    Understand nothing has been done am just asking question as I said before the manual says a purple wire but the motor does not have a purple wire only orange so I'm thinking the orange wire works the...
  35. Nobody said anything about the wire size so...

    Nobody said anything about the wire size so please do not reply to any of my ouestions thanks
  36. My fuse box is full so can't add another fuse,so...

    My fuse box is full so can't add another fuse,so what I am doing is adding the attic fan to this 40amp breaker already installed with a load that pulls 27/27amps and the attic fan motor pulls...
  37. Mfr mode#l4m101 at grangers the installed breaker...

    Mfr mode#l4m101 at grangers the installed breaker is 40amp the motor wires individual
  38. Yes I just need to know how to connect the two...

    Yes I just need to know how to connect the two hot wires and do I need to add a ground and a netural wire
  39. Wiring a two wire 240volt breaker into a three speed motor

    I'm trying 2 hardwire my attic fam motor into a already installed 240 breaker.my fan motor is a 3peed 208/230 volt motor and the breaker is a 2 hot wire breaker how would I wire the 2 hot wires into...
  40. Answers
    2
    Views
    334

    Attic fan motor problems

    I've just replaced my attic fan motor with a DAYTON 1/2 hp direct drive motor,permanent split capacitor #4m101 and a three speed pull chain switch.now when I turn it on nothing happens all it does is...
  41. Answers
    5
    Views
    536

    Dayton direct drive blower motor 1/2hp #4M101BG...

    Dayton direct drive blower motor 1/2hp #4M101BG also do I need to add a capacitor and can I connect the control box from the old motor to the new motor and wire it to the low speed
  42. Answers
    5
    Views
    536

    Attic fan motor wiring

    I'm replacing my attic fan motor and the old motor only had three wires (red,blk,white ).the new motor has four wires( blk-hi,blu-med,red-low) so can anybody help me to wire this motor.
Results 1 to 42 of 44