Search:
Type: Posts; User: Angrycustomer
Search:
Search took 0.01 seconds.
-
-
Make somebody else have a bad reputation for the moment. Your all wacked
-
Did you bye it from sears? If so, call the 800 number and ask for a junk technician. They changed there job titles and you need somebody who knows what they are talking about.
-
-
=
you're a god damn genius how come you didn't tell him it could be a normal operating noise. Naturally I could also be the idiot for posting this.
-
=
you exceeded my expectations... a brilliant answer. You must work for yourself.
-
Might be a bad T-stat or a fan relay sticking.
-
What you need to do is get the new kenmore 5bj5hd dirt generation system!
LOL, wish they did make a home fuel cell to generate power! Imagine a whole block with fuel cells selling back their...
-
Throw that piece of junk away dork.
-
Cutting chorion is a flakey business. Its best to use a router for trimming the edge. Honestly, call a carpenter, you need Jesus.
-
5 months ain't nothing! I think its long enough to start together and the kid would adjust in time.. I see your point about her calling the shots...
-
What I don't understand is this: Hydro works well for turbines and the latent energy of water is understood as a constant. How about wind? It seems to me if the air quality is perfect then the mill...
-
What I don't understand is this: Hydro works well for turbines and the latent energy of water is understood as a constant. How about wind? It seems to me if the air quality is perfect then the...
-
=
I'll replace the boards for you at your cost for the part and fifty bucks plus 2.50 cents a mile for travel. Now if you can beat that price your really busy.
-
Might be a bad valve or iced line on the fill cup or a shorted motor not allowing the contacts to make for water and check for filtration... they just came out with a brand new ice maker that...
-
Xoxo. /|\
I'd agree to clean the valve screen and seat along with a little emory clothe for the plunger.. I never use aerosols too much anymore. Just make sure the valve seats no gunk, junk, or...
-
I can't wait until they develop a multi meter with a calculator on it displaying RH% and PT chart saturation temps. Hook ups for refrigerant line temps with automatic conversion for which ever...
-
=
the answer is for them to give you a free service contract for a buck twenty five instead of one call... this way they will marry your unit! LOL. I just went to home depot and got a dishwasher...
-
=
troopers protect, but you could try PROATEQ... Sounds to me like something is wrong on the inside... You in Troop C NJ? If so, a free repair is on me... 903278. The 79 degrees is just a readout...
-
Sounds jazzy to me... what series you have.
-
=
moisture in the pressure switch is a common failure... and easily rectified. Take off the 1/4" tube from the inducer motor from the switch and suck on it honey. If it clicks and the flame comes...
-
=
I think the ignitor could have been replaced for about 120 bucks in say 60 minutes if I was there. Did you buy a spare ignitor too? For 150 bucks I would have offered you a full fix and a spare...
-
:mad:
Maybe they should think about expanding some union jobs.
-
I thought amplification adjustments was a design requirement. Without the resistors we would see infinity of course; however, with no way to adjust the probes ability to have an adequate threshold...
-
You first have to get an infrared ion detector from home depot. This will enable you to detect heat movements on the inside of the compressor dome while its functioning. Ultimately you can see the...
-
Sounds like you need to check the relay and overload.
-
So, what's the difficulty?
-
Yeah, it's a top mount probably a 18 or 20 cubic foot. Something like that? Those boxes can't be wiped out enough. After you remove the freezer wall and clear the drain and water under the pan...
-
=
break them then call sears... Ask for 903278 only. I'll order you new shelves then for a cup of coffee (better be whole bean soaked in old #7) I'll show you how to make your crisper drawers...
-
-
Check the condenser fan if you like... clean the condenser with a brush and make sure the evaporator fan is running. Open the refrigerator door and place a mirror at the diffuser to see if the air...
-
GE really should get into making a better evaporator. Something with an expansion valve so proper meat temperatures can be reached. I would love to be on their design team... I got better ideas...
-
=
that is a fix john... but you have to be a plumber technically. Once that's done make sure your plastic lines can handle the extra pressure and don't blow out... I don't think the type of valve...
-
Unless your not certified, then check thermistors if the box has 'em.
-
I was told not to plug a refrigerator into a ground fault interrupter circuit.
Just do what works. What's the problem in reseting the receptacle? Just wire in a LED to your PC and route it...
-
Suck the unit down and put a small trap on the suction line. Then change the drier, and recharge with new oil, and freon weighed in.
-
Not sure about the type of pump you have... but I hope to work on those units... nice stuff. My educated guess is that it's a rotary pump. The displacement on those small pumps usually are higher...
-
I think your drain is plugged... unplug the appliance, empty the freezer, take off the back wall and ice maker. Boil water and melt the ice. You might have to take the evaporator and move it up or...
-
You would think a wider magnet surface would be able to withstand the pressure difference in the cabinet when the other door is slammed or an air curtain in the diffuser could stop the draft... but...
-
First off.. ice makers are best under the counter. Inline filters are good, and should be used with the refrigerators that don't offer filtration. Try to pick a filter where the cartridge can be...
-
=
lol.
the valve on your refrigerator has a screen on it... this will stop most flakers from getting into your drink. Inline filters are good. It is best to filter the water close to the...
-
You need a new piece or food grade silicone to seal the tear.
-
=
imagine a ball for a tumbler!! I know that sounds silly but how come they didn't make that yet?
-
=
what makes those coils go? I see it all the time. Is it variation in voltage or the way they are wound?
-
What color was the lizard too?
-
=
what kind of lizard was it? How long? Was it moving slow or fast? When you turned your head did you see blurs or just entirely forget what just happened? What's your earliest memory of...
-
=
I had an old box the other day with a busted water line. The tech before me ordered an ice maker and valve. Both coils tested fine. I replaced the 1/4 inch line and checked for water, but...
-
=
winer. I wonder how your vent system is installed? I wonder about the periodic maintenance that was negated. I wonder about the back pressure and the style of connections used and the...
-
The only thing is the heater, for an electric dryer. Unless it's a commercial unit. I think I might of made that mistake. Thanks.
-
Its possible the drain is plugged and its running out on defrost. Is it a removable drain pan? If so, take it out from underneath the fridge and clean it up. Then put it back to see if it collects...
|