Search:

I have an Amana washer model number LWA50AM that will fill, drain and spin but won't agitate. In agitation cycle the motor hums like it is in a locked rotor state. Any ideas?

I have lost my job and prospects are limited. If I have to file for bankruptcy whay can I expect to happen? I want to go into this with as much knowledge as possible.

Thanks Crigby. Turns out the switch was bad.

I'm pretty sure I have a sticking solenoid on my MTD lawn tractor. The starter will not disengage when the key is off and removed. I plan on replacing the solenoid but I can't find the thing and...

If it is a riding mower and has a new belt(s), the belt is probably not adjusted correctly. I had the same problem after I installed a new belt.

If it is a riding mower and has a new belt(s), the belt is probably adjusted too tight. I had the same problem after installing a new belt.

I just replaced a motor in an Amana electric dryer, model no. LEA50aw. Got it back together (boy that belt was a job) and I have a blue wire with a black tracer left over. It has a female crimp on...

Does anyone have any idea where I might find a replacement spacebar for my Dell notebook? My 10 Y/O got a bit rambunctious and broke the tabs that hold it on.

How would I go about finding the evaluation of a property back in January of 2009? My brother and I inherited a property back then, rented it for awhile and sold it this year. Need to know the past...

I have a Canon MP210 ink jet printer that seems to pull the paper feed from the right hand corner when feeding which, of course, jams it. Any ideas?

We have a 7 year old amana 80-SV furnace. It has an automatic pilot light. I can't light it manually. The pilot went out and will not restart per the instructions inside the upper cover.

Thanks. I don't think they are very expensive. I'll probably replace both. There is a temp regulation problem with the fridge too. It stays about 30º regardless of where the control is set. ...

Thank you. There might be a corrosion problem now that you mention it. This first started when on vacation at the beach in Florida last summer. I'll give it a try. Repairs must be outrageously...

Using Energizer Industrials (Alkaline I"m sure) but this is a very recent problem. I"vee shooting it for some time with no trouble with the same batteries.

I have the same problem with the same kind of fridge. I vacuumed the coils and unplugged the fridge to reset the computer. Neither worked. Wish I could be more help but will let you know if I find...

Odd that your breaker is tripping with all burners turned off. It does not trip with old burner installed because it does not make up a circuit. The trip is likely caused bt a ground fault. Try...

I have a 1 1/2 Y/O Pentax K100D SLR. Often it will give me a "Battery Depleted" message and won't work. This happens with fresh batteries that I have metered so I know they are good. Any...

We have a 7 Y/O GE side by side refrigerator. The water dispenser usually doesn't produce water, ice is OK. Sometimes it leaks and will the work. Kind of a nutty problem. I wonder if we have a...

That may very well be the problem. Will try and let you know.

We have a GE side by side model SS25NGMBMGMB BB, about 7 years old. We set the temperature at 37 degrees but it maintains about 29 to 30. Water reservoir has frozen and vegetables in the drawers...

No, not late on anything. Could my age (64Y/O0 have anything to do with it?

Thanks for the quick reply. I offered to sign a quit claim if he would get both properties appraised, get a note for 1/2 less whatever he has paid from his own pocket for repairs. I think this is a...

My brother and I inherited two, free and clear houses in Missouri where he lives. I live in Georgia. The two are worth about $300-$350K. My mother filed a beneficiary deed with both my brother and...

We are having a problem with paying our credit card debt. The interest rates are killing us (30%) in some cases. I pay on line and even my own bank who I have been with for twenty years gives us...

I have a Cannon MP160 that's about a year old. Suddenly I'm getting a "printer out of paper" message when the printer is full and it, of course, will not print. I have tried cleaning the rollers...

Thanks Mowerman. I'll give it a try. Can you tell me who makes the aftermarket spincles?

I have a 6 Y/O MTD riding mower. The spindles appear to have gotten rusty over the winter and don't turn freely (stored in a garden shed). I have already broken the belt due to the increased...

Actually I am using a container that had a "store bought" candle in it. It burned flat but mine doesn't.

I am a beginner in candle making. Why do the candles I make form a deep cone around the wick when burned? Commercially made candles don't do this. They burn flat. How can I correct this problem?

It would be best to follow the manufacturer's specs. The reason is the 40 Amp breaker won't clear a fault (short) at 35 amps and might burn up something in the new unit voiding you warranty. As a...

I have a 6 year old Amana CCA30 furnace. The blower motor stopped turning and emitted a 60 hertz hum. I replaced the capacitor and it worked for about 3-4 heating cycles the stopped again producing...