Search:
Type: Posts; User: Shifftali
Search:
Search took 0.00 seconds.
-
HI! I am wondering if I can plug my hot water insinkerator into the outlet that my refrigerator is plugged into. the fridge model sticker says it draws 7.2 amps and the insinkerator says it draws...
-
HI, I have a product (a woodworking project) that I'd like to get manufactured. I have already made several versions of the prototype and I don't know where to start next.
Is there a company I can...
-
-
Thank you for your reply. Yes, I'm trying to read the iMac desktop HD from my windows computer. So I probably need the software. BUT I still hope there is no damage to the data from the short. Is...
-
Thank you for your reply. Yes, I'm trying to read the iMac desktop HD from my windows computer. So I probably need the correct software. BUT I still hope there is no damage to the data from the...
-
I have an internal hard drive from an old iMac desktop (2008?) that id like to get the data from. I also have a SATA reader but when I plug it into my windows toshiba laptop - nothing happens. Can it...
-
I see the pics never went through. I'm using a SATA to USB adapter connector (a sabrent model number EC-UK25. The computer was working a few months ago.
Here also is a caveat: while taking out the...
-
I removed my IMAC (EMC No. 2118) (late 2007 or 2008?) hard drive after my power supply died and I didn't want to spend the money to replace it as the computer was already around ten years old. I have...
-
Heat on blowing cold air. I have a heat pump system.
-
I have an electrical hvac system. It's really old and I know it's one for a new one. It's blowing cold air only and I'm just wondering if there is a tune up possible to fix it before plowing forwards...
-
HI thanks for your response. Before I attempt, I'd like to clarify. When you said: "If it stays on and has voltage there is a wiring error..." can you explain this - if it stays on after I reset it...
-
Hi I've heard that its possible to become a certified electrician in as little as 6 months. This is something Im interested in doing on the side (both as a hobby and perhaps to make some money if...
-
HI thanks for your response. Before I attempt, I'd like to clarify. When you said: "If it stays on and has voltage there is a wiring error..." can you explain this - if it stays on after I reset it...
-
My GFCI breaker (15 amps) keeps tripping. I am 99.99% positive that it only goes to one receptacle in my enclosed back porch. I've taken out the receptacle (which was one of those fancy outdoor proof...
-
After more research, I can answer my own question. The switches that are in my house are known as "companion" switches where all the switches are wired not to the lights or the power but rather to...
-
Would I be able to replace it with a regular wall switch that is a three way? Otherwise, if the switch is off I'd have to turn it on from one end of the room in order to activate it from the other...
-
I have a short term and long term electrical problem:
Short term: the lights in my bedroom are flickering constantly. When I turn off the lights they still flicker but a very dim flicker. The...
-
Sounds like a cracked spindle. Open it up and see for yourself. Go on you tube and search for instructions for how to open your type of washer
-
Inspect the cage around the unit, perhaps there's part of the cage that's rattling (it happened to mine), and then perhaps when the rattle reaches its resonant frequency it stops...
-
Possibly clogged drain line. Open it up and see if you can locate a clog
-
So I rechecked all of the dryer components, and I swapped out the 40 amp to thirty amp circuit breaker (the 40 amp breaker had one of the screws jammed in and twisted sideways I couldn't even get it...
-
OK thanks! I will try this and hopefully it'll work, ill re-post
-
The dryer is six months new. I opened it, cleaned out the vent and all areas, ensured that the motor runs smooth, I tested the thermal fuse, and the dryer keeps shutting off mid cycle. The terminal...
-
1) I determined it was the breaker by thorough process of elimination 2) I don't know what I'd accomplish by putting in a thirty - except that the dryer instruction calls for a thirty amp breaker but...
-
I have a 30 amp electric dryer with an eight gauge wire running to a 40 amp circuit breaker. As my dryer keeps stopping midcycle and I've narrowed down the problem to a bad breaker, how should I...
|