Search:
Type: Posts; User: chaosmaster1
Search:
Search took 0.01 seconds.
-
Double check to make sure all powersupply connections to the motherboard and other device are the properly plugged into the right place, check to make sure the switch on the back of the powersupply...
-
You can list them, they can not say anything other than that you worked there and that's it, if they say anything else they open themselves up to a lawsuit
-
Try switching out the powersupply with a known working one
-
You pretty hit the nail on the head. Couldn't have answered better myself
-
Drain it almost completely empty leaving at least 2-3 inches of water in the bottom and wait until it is time to open the pool and either replace the liner as a whole if you can afford it or...
-
Is it a in ground concrete pool? If it is drain the pool and remove the hydro stat plugs but be careful do not look at them or stand over them because they sometimes can shoot upwards. I have had...
-
Yes you should maintain your stabilizer at somewhere between 35-45ppm. As far as the copper get rid of it asap. Overtime the copper pipes will dissolve due to unbalanced pool water and it will stain...
-
I know that it would be overkill but do it maybe as a 30 amp circuit
-
She is in hospice care at her house and my mother has moved in and is helping take care of her and keep her comfortable. She suffered a small stroke about 2 weeks ago and then last Friday suffered a...
-
Yea. I just hope she passes quickly and does not suffer too much
-
Her living will states that there is to be no medicine/machines to keep her alive. I brought her home so she can die in peace. Thanks for your help
-
It could be the thermostat sticking or your radiator fluid may be contaminated with gas or oil.
-
She is not on life support and her living will says that she does not want to be in a vegetative state. I'm just trying to find out the facts before I talk to the doctor.
-
I need to know if doctor assisted death is legal in Virginia and North Carolina.
My grandmother is 79 years old and has suffered a massive/major stroke and is brain dead with no chance of ever...
-
It's either the video card or the cable, replace the cable first if that doesn't work then replace the video card
-
Put up some internal brace to prevent it from collapsing in on it's self
-
First of all chlorine and any metal does not mix to well and if you use chlorine and are using any products that are copper based it will eventually begin to discolor your spar as well as build up...
-
It could be the fuel float sticking and causing the problem or the gas gauge may be faulty
-
Are you getting any error coeds on the display? That would be helpful
-
Either you got a bad heating element or you installed it wrong or you need a new spa pak. A spa pak is the controller board that all of the motors and acessories plug into
-
It was a 1958 Plymouth Fury with a 350 dual quad and a Torqueflite automatic transmission
-
Go to poolcenter.com and go to the leak detection p;art of it and order a prefilled dye testing tube and be sure to get a dye refill bottle. And also be sure to get a quality liner patch kit. Make...
-
Glad you got it resolved had the same problem kept fighting it but I eventually replaced it and I am glad I did
-
A new mouse is very cheap it's easier an cheaper to replace them. You could pick one up for about 5-10$
-
Check the idle air control valve
-
Try putting 1 bottle of marvels mystery oil in the engine, you may have a hairline crack in the engine block it's self
-
It could there is something wrong with the battery
-
Just port the exhaust manifold right? I don't think that it has a differential of the front wheel drive. Will porting the manifold enhance the exhaust sound any?
-
I'm using the penzoil high mileage synthetic oil. What exactly do you mean by porting the exhaust? How exactly does a cold air intake work?
-
I've posted on here before about this nissan. What I have is a 1996 nissan sentra. I am looking to get some more performance out of it like quicker acceleration and a meaner exhaust sound. What it...
-
If that doesn't work there are certain but rare windows xp pro disks that when you go to install them they will copy over all of your system files, please repost if this works
-
What you need to do is use a windows xp professional disk get to the recovery console where you have the command prompt and type in ( chkdsk ) without the paraphrases if that comes back clean the...
-
go to the dmv where you live and have the person selling you the car and get a replacement title issued
I apologize if this violates this sites rules but here is the dmv website for where you...
-
Txgreasemonkey said it before I could
-
Have you checked to see if it is getting spark if it is getting spark but intermittently please read the following: remove the distributor cap and check the ignition rotor sometimes the set screws...
-
Is it safe to say that it is a dual tank ford if so? It coould be 1 of 4 things, all of the fuel pump relays are bad, 1 of the fuel pumps is bad(I think there are 2 low psi and 1 high psi fuel pumps,...
-
You definitely have air in the system or even possibly a faulty master cylinder
-
Should I paint the drums red as well? I also forgot to include it in my previous post, what color should I paint the trim on the car, I'm talking about the trim around the windows, and any ideas on...
-
What is a good looking color to paint your rims if you painted the car black?
The car is a 1996 Nissan sentra gxe with a ga16de with 258000 miles on it with stock rims and tires. I wanted some...
-
Possibly a clogged radiator, is it a regular fan that is powered by the drive belts spinning or is it a electric fan?
-
Maybe it's a clogged pcv valve?
-
I forgot to add that when thermostats get old they can have a tendency to stick shut causing it to overheat once the engine warms up.
-
Replace the waterpump, thermostat and all related gaskets, either the waterpump is bad or the radiator is clogged or it could be a bad temperature sensor or a faulty gauge
-
Check the mass airflow sensor or whatever sensor it has for that and check for intake manifold vacuume leaks
-
Have the starter checked, I had a similar issue in a nissan the throttle body coolant line was leaking down on the starter and it eventually caused it to sometimes to start and not start. The solenid...
-
Check the fuel pump relays and there should be a box of some sort attached to the steering column underneath the dash check to make sure that it is properly secured, would it be safe to assume that...
-
I think that the processor is overheating because it only takes a few seconds for it to heat up.replace the cpu fan cooler, and when you do that make sure you use some new thermal paste.
-
Go to your local pool store/internet and get something called liner lock and install it, put the liner back into the groove where it normally sits and the liner lock gets pushed down into the same...
-
Check the mass airflow sensor ad clean the idle air control valve as well as the entire throttle body
-
I am not sure about the code but you would be better off running solid conduit the kind that has to be glued together all the way because the flexible stuf has a tendency to wear out and separate in...
|