Search:

Hello,
Got a shower basket - https://www.amazon.com/KOKOSIRI-16-I.../dp/B08GKVKM7H
to attach to drywall over shower tile. Tile does NOT go to ceiling, There is about 18" drywall between where tile...

Afraid, basin wrench wasn't doing anything.

Someone has suggested elsewhere to use a lubricant specifically for plumbing nuts, not wd-40 but something else.

Will take a look at that.

Hello,

Ice has started developing recently in Food in GE fridge. No ice anywhere else in the fridge, just in food/vegetables.

I tried lowering the cold setting and tried raising the cold...

Hello,

Seems that there is a leak from a supply line hose under Bathroom basin. Need to loosen the bolt that connects hose to faucet.

What's the ideal/recommended method to loosen this bolt....

Hello,

Got a doorbell that is no longer working.

Took the switch off and joined the two wires together, NO CHIME.

Cleaned Bell and found transformer.

Using multi-meter on Transformer...

Hello,

Have a Furnace in the basement and see that water is dripping down from the furnace aluminum tube that goes to the second floor, don't see any water leaking from the tube that goes to the...

Hello,

Recently Whirlpool dishwasher started leaking from bottom center, after I took off the bottom panel, I could see water dripping from the center.

After a couple of days, I took of the...

Did 3 loads without any issues now.

Opened door mid-cycle and no issues.
No humming,
no sound when timer is in OFF position
no heating element on when door is opened (we are going to let...

Right now, the dryer is running fine. The humming problem happens when we open the door mid-cycle and then close the door and press the ON button. As long as we are leaving the timer to complete the...

Finally got that. Was missing noticing the black door switch. So I set timer, pressed the black door switch and pressed the ON button and drum started rotating. So we put one load in the dryer and it...

Opened the top panel of the Dryer and see that the belt looks OK, it is tight and am able to rotate drum. Now, should I look at motor or look at thermal fuse etc?

Roper Electric Dryer model – REX6634PQ0 - hums when switched on, drum does not move. If we keep dryer plugged in and EVEN when dryer knob is in OFF position, we hear something running – like a...

Got ONLY PRV replaced and noise is now gone. Thanks for your assistance.

Total cost $600 for both PRV and main water spigot. Don't think I'll be going with this guy though.

Got another plumber to take a look at it. He wants to replace PRV as well as main water spigot valve as well. He stated that normally people replace both at the same time.

Ah well..

I think you are mistaken. The site clearly says that materials is between 41.88-45.35 that includes valve (see where it says "1 valve") and includes all fittings. Labor is for 2.1 hrs.

Pressure...

Well, this website mentions that it should not cost more than $175 for my zip code - 22030
http://www.homewyse.com/services/cost_to_install_pressure_regulator_valve.html

Also, was wondering if...

Hello,

We have recently started hearing a continuous grinding noise/vibration in pipes for a 2-3 seconds after any faucet is turned off or when toilet after flushing completes filling tank or when...