Search:
Type: Posts; User: Luvless_69Chevy
Search:
Search took 0.00 seconds.
-
I see no leaks under the car. The brake fluid is low, but I am assuming that is because the brakes are low. I have been told not to add fluid when the brakes are low since the fluid is in the piston...
-
I will give this a whirl. I don't make much money, but what I get will definatley be going to fix this problem.
Thanks. I will keep this updated as I get the chance.
-
I have a 1993 Dodge Grand Caravan LE with a 3.3 L engine. The ABS light as well as the brake light are on in the dash. I have checked the codes, and nothing comes up except 12 and 55. 12 meaning that...
-
I took it all apart, and it looked good. I saw no scoring on the bearings. I saw no metal shavings inside the balancer, so I am going to risk it and try it. If I have to put a new one on, I can do...
-
I forgot the Spindles.
67-69 Camaro except the 69 Z28 with special steering, 67-72 Chevelle, 67-72 Buick Skylark, 67-72 Olds Cutlass, 68-74 Nova, 70-72 Monte Carlo, 71-72 GMC Sprint, 71-74 Pontiac...
-
I have a 69 el camino. I bought the car with dics on it. The parts store just hands me parts when I tell them it has disc brakes. You could try asking them.
I do have an interchange manual that says...
-
Awesome guys. Thanks. I plan on looking at tonight. Will post something about it once I'm done.
-
So I have to mark the engine at TDC beofre installation correct. And then install the part. Is there any sort of way of knowing anyhting about the gear lash? Someone told me something about setting...
-
I have a 1995 Toyota Camry with a 4 cylinder. I had to pull the motor due to what sounded like a TERRIBLE rod knock. I have a new motor already and I am swappin parts from old to new. The old motor...
-
Check out this site. It helped me A lot!
I think it is a high performance web site, but between than site and this one I got all the answers I had.
How To: Change a Head Gasket. -LOTS of pics-...
-
Well, I pulled the distributor one night because I had a few people telling me that the pin that holds the gear on the bottom of the distributor (which connects to the cam) could have sheared. So I...
-
I haven't pulled it since this problem started. I wanted to, to see if something may be wrong with it, But I have not touched it other than to move it around to move the timing.
-
Well, I checked all that out. No problems there. I took the coil, cap, module, rotor, and condenser to the store I bought them at. The swaped out the coil, module, and condenser for me. I bought a...
-
Well, I've owned this car with the HEI in it since 2003, and had problems with everything else but the ignition. I had problems once when it would not start hot, but I replaced the everything under...
-
It is an internal regulator. How do I check the internal style? The alternator is fairly new still. Maybe a year or so old.
-
I have a 69 Chevy el Camino with a SBC 350 with an HEI out of a 75 Blazer 2wd. The car will turn over just fine, it just won't catch and start. I pulled the air cleaner off, so I know it is getting...
-
I am some what famiiar with carbs. My daily driver has a carb'd 350 and this is my dad's car. He is planning to adjust the choke rod a little and see if that helps. Hopefully!
-
This seems to have fixed the problem. It idles high in the morning when it first fires up, but we are going to adjust the choke and see if that helps.
-
We replaced the points style distributor with a Petronix Flame thrower and changed out the coil. It seems to be fixed. We had it running once and then it happened again. So for now, it looks to be...
-
My dad has a 67 camaro with a 250 straight six. It is all original with ALL the smog stuff still hooked up. We are having problems keeping it running. It starts not a problem, but it will not stay...
-
I don't know where to check for continuity, but I do know how.
I have a short finder, but that sounds like it might work better. I plan on buying a whole new harness for the entire car, since it...
-
I have an interesting problem on my 69 el camino. It keeps popping fuses for the tail lights and turn signals. I thought I fixed it by cleaning up the contacts on the tail light housings, but it...
-
I replaced the head gasket on a 95 civic with OUT a manual. It is fairly straight forward. My only problem was setting the timing belt to the right position. It took me a few tries. Once I got that,...
-
This is for a D Series motor. It helped me with my head gasket on a 95 Civic with a 1.5 non V tech, but the pics are of a V tech. The whole site is pretty helpful.
How To: Change a Head Gasket....
-
Turns out the timing belt was off by a few teeth. Fixed that and it started right up, and runs like a champ. Still a little worried about the comporession, but it is running, and the owner is happy...
-
You could have someone take over your payments. Have the loan transferred to their name. Or you could keep the loan in your name, and have them make the payments to you and you send in the payment. I...
-
The CEL goes off after the two seconds. I can hear the Fuel Pump running, which is also evident with the fuel on the plugs. I also hear the main relay clicking after the CEL goes out. All the fuses...
-
I just put a new head gasket on a 1995 Honda Civic with a B17b7 1.5L Non V Tech. I replaced the spark plugs, as well as the plug wires. I gapped the plugs to 1.1 mm like it said to do under the hood....
|