Search:

Hi Tom,

I'm almost ready to start :)

"You will cut in a 4X3" sanitary tee in the 4" soil stack and come off that with a 3X2" wye. The 3" will pick up the toilet and you will bring the 2" up to...

So (if possible) I fit the 2" pvc over the 3" toilet drain, then tie it into the lavratory drain (wet vent) using a Wye connection. Where and how does the 2" lavratory drain tie into the soil...

Thanks for the input Tom.

Hopw about this? The drawing is not to scale, but I think it fits.

Tim

Hi Tom,
I am providing a more exact map of where I would put the toilet (10in. Rough), tub (5ft. X 30 in.), and sink base (30 in.). The yellow bars show the floor joists. They are 16 in apart, and...

Hi Tom,

The entire group is being remodelled.

The floor is torn up, but I will access from below if I have to. As of now there is no drainage, since the bath and sink were previously on the...

Upon remodelling an old bathroom (second story, no fixtures above), I found nearly all the pipes to the fixtures nearly rotted through (brass drains?), with no significant venting. I have a left...

1) What's the best way to cut a 4" cast iron soil pipe that is against the wall of the house so I can't get a snap cutter chain around it?

related:

2) Is there an adapter to connect 3" pvc...