Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: tmeyer01

Search: Search took 0.01 seconds.

  1. Answers
    1
    Views
    296

    Snowblower loud with black smoke

    I have an MTD 2 stage snowblower. I recently had to replace the worm gear but now it works fine. This last time I started it it was really loud compared to what it normally is. Seemed to get even...
  2. Answers
    5
    Views
    418

    Another question on this. Is there a problem...

    Another question on this. Is there a problem using 2 sections of tubing and joining them or do I need 1 continuous section of tubing? I need about 40 feet and was wanting to use 2 20 foot sections...
  3. Answers
    5
    Views
    418

    Yes I will hire someone to hook up the lines but...

    Yes I will hire someone to hook up the lines but I just wanted to know where to run the line for them to hook up. Thanks

    Yep I am aware of all of that too. I just wanted to know where to run the...
  4. Answers
    5
    Views
    418

    Natural gas connection

    Iím adding a garage heater. Can the natural gas line be tied into an existing gas line (T joint) or does it need to run back to the steel pipe where the other gas lines originate?
  5. Answers
    5
    Views
    1,158

    Yep I have some. I can get flame shooting at...

    Yep I have some.

    I can get flame shooting at the plug when out of the engine and turning over (I know, dangerous) but then nothing when I put back in the engine after spraying in there. Very...
  6. Answers
    5
    Views
    1,158

    It is like it is getting spark until I put it...

    It is like it is getting spark until I put it back in the engine and then not?I say it has spark because if I take it out but leave the plug wire on, put it next to the frame, and turn it over, there...
  7. Answers
    5
    Views
    1,158

    Can't get ATV to fire

    Hi, I have a Chinese brand ATV (Coolster). It's only a couple years old and barely used. It was running well but then just could not get started one day. I have replaced the carburetor with a new...
  8. Thanks. I have tried running directly from the...

    Thanks. I have tried running directly from the adapter, brand new harness, right to some brand new tail lights and ground to trailer frame and still same outcome. I took all other connections and...
  9. Trailer lights not working correct, which wire?

    So I have tried everything. Even bought all new brand new lights, wires, etc. I have the tail lights and turn signals working but the brake actually turns the lights off? What could be causing this?...
  10. Answers
    5
    Views
    654

    Well after trying every combination I determined...

    Well after trying every combination I determined the fridge just doesn't work. Thought it was the rat's nest of wires but every combination and messing around with other things didn't help. I was...
  11. Answers
    5
    Views
    654

    I figured it out but thanks for the replies.

    I figured it out but thanks for the replies.
  12. Answers
    5
    Views
    654

    Pop-up camper electrical questions

    I recently purchased a 1990 Starcraft pop up but the lights and fridge don't work. All the wires have been cut an re-spliced so not sure what should go where.

    I have the main 120v running into the...
  13. ChromAlin by Rhythm Band Instruments (autoharp) (chorded zither)

    Hi, Does anyone know anything about these? I have searched and searched and can't find much of anything about this musical instrument. There are a lot of autoharps or zithers out there. Most of them...
  14. Thanks for the reply but it's not the tires or...

    Thanks for the reply but it's not the tires or the driving. I'm positive of that. I have quite a bit of winter experience myself and know how to drive.

    I have slippage on that one side even on...
  15. One front wheel seems to be slipping (no power)

    Hi, I have a 05' Town and Country Minivan which I really can't take anywhere in winter anymore without getting stuck. Even on almost flat surfaces. I noticed a while back whenever my front tires were...
  16. Ok, from what I have been told since it worked...

    Ok, from what I have been told since it worked intermittently, it was not the resistor. I took the blower motor out today and tested it right to the battery and it worked fine. This is an automatic,...
  17. How do I do that? Thanks

    How do I do that?

    Thanks
  18. 05 Town & Country blower only works sometimes

    The A/C and heat work fine. The rear blower works fine. The front blower does not. Sometimes it runs when I start and sometimes it comes on as I'm driving. Lately it hasn't come on at all. I have...
  19. Answers
    5
    Views
    2,500

    Thanks for the help.

    Thanks for the help.
  20. Answers
    5
    Views
    2,500

    I will be doing it myself. Just to clarify: 1. I...

    I will be doing it myself. Just to clarify:
    1. I should put a 2" cleanout on the sink drain and then vent that out with at least 1 1/2"
    2. Don't really need a cleanout on the shower drain vent but...
  21. Answers
    5
    Views
    2,500

    Pipes in roughed in basement bathroom

    Can someoe please verify what all the pipes are? I know the toilet and I assume the one right behind it is a vent. I'm pretty sure on the sink drain and the shower drain but what is the pipe next to...
  22. Answers
    1
    Views
    785

    2005 Town & Country blower not working

    Hello, hoping someone can tell me my issue by knowing the situation. I assume it's a resistor or motor problem but not sure. Two nights ago I drove the vehicle and everything worked fine. Yesterday...
  23. SUNL ATV electrical issue, sparked when working with the ignition, now nothing

    Hello, I have a SUNL Transformer V6 ATV. (China youth ATV) It was running just fine but I lost the only key for it. I thought I would try to hotwire it somehow but apparently I did something wrong....
  24. Answers
    1
    Views
    1,823

    ATV has spark but won't start

    I have a Chinese youth ATV. It worked fine earlier this year but then the battery was removed. I now have a new battery, I have filled the tank with new gas, and I have spark. If I spray gas directly...
  25. No, there are no apparent leaks anywhere. The...

    No, there are no apparent leaks anywhere. The first can of coolant I put in had some neon colorant in it. You can certainly see what sprayed out from hooking it up on the port but I see nothing...
  26. Chevy A/C compresser keeps engaging and disengaging

    I have a 2000 Tahoe. The air worked earlier this spring but then just stopped getting cold. I added one can of coolant but it didn't seem to help. It had a colorant in the can to help find leaks but...
  27. Answers
    1
    Views
    291

    Rotor turns in park

    I have had a knocking sound when I start, stop, or go slow. The tires, brakes, and rotors are OK. I had no movement at all on the passenger side when I removed that one. When I got to removing the...
  28. Answers
    6
    Views
    1,068

    Yes, I have taken the entire dryer apart several...

    Yes, I have taken the entire dryer apart several times. The entire body and duct work. I had to when I replaced the motor. It has all been cleaned. There are no air restrictions but still stops.
  29. Answers
    6
    Views
    1,068

    Kenmore Model 110.66822694 Serial MJ2060676

    Kenmore
    Model 110.66822694
    Serial MJ2060676
  30. Answers
    6
    Views
    1,068

    Kenmore electric dryer keeps stopping

    The motor burned out on my Kenmore electric dryer a few months ago so I replaced it. In the process, I burned out the thermostat which I then replaced. It worked great for a couple months but...
  31. Answers
    11
    Views
    1,117

    No lanyard. Just a kill switch by the throttle....

    No lanyard. Just a kill switch by the throttle. The only thing running from the handlebars on that side are the throttle cable and two wires from the kill switch and those are what I tried to bypass.
  32. Answers
    11
    Views
    1,117

    The kill switch has two wires leading from it. I...

    The kill switch has two wires leading from it. I have disconnected the harness and direct wired it to bypass the kill switch but that didn't seem to help. I have also bypassed the ignition but that...
  33. Answers
    11
    Views
    1,117

    Could you explain that one a little better so I...

    Could you explain that one a little better so I can try it? Can a kill switch just go bad like that on it's own? It really does seem like the kill switch is pushed in even though it's not. I get...
  34. Answers
    11
    Views
    1,117

    Comment on Stratmando's post

    Compression is fine, just not getting the spark. I have checked the fuel line, carburetor, and spark plugs and everything seems to be working. Just can't figure it out now.
  35. Answers
    11
    Views
    1,117

    Well all the switches are in correct position but...

    Well all the switches are in correct position but I will have to start checking into the wiring I guess, which I really don't want to do. :)
  36. Answers
    11
    Views
    1,117

    Snowmobile just died while going full throttle

    I have an old 1991 Arctic Cat Jag snowmobile. It was not running for a few years and the mice took over. Anyway, I cleaned out the entire fuel system and carburetor and managed to get it running...
  37. Answers
    1
    Views
    737

    I found this answer on techrepublic.com and it...

    I found this answer on techrepublic.com and it worked great.

    To resolve the issue, follow the steps below.
    1. Right-click on My Computer, and select Properties.
    2. Click on the Advanced tab....
  38. Answers
    1
    Views
    737

    Printer error message

    I get the error message "SYSTEM ERROR The document cannot be printed due to a system error. Try printing again. If unsuccessful, restart Windows and try printing again."

    I get this message...
  39. Answers
    0
    Views
    292

    Simple question on 91 arctic cat jag carb

    I am trying to get an old sled running again. I had taken the top of the carb off in order to get the carb out for cleaning. In the process of cleaning things, I accidentally hit the throttle and the...
  40. Answers
    7
    Views
    1,067

    This is the one that I can find. I have an AO...

    This is the one that I can find. I have an AO Smith model FPSH 40260. The thermocouple (part 183267) is included in this entire assembly which costs over $100. Is this the right or am I looking at...
  41. Answers
    7
    Views
    1,067

    Is there a way to test the thermocouple? It's a...

    Is there a way to test the thermocouple? It's a pretty spendy part. Thanks
  42. Answers
    7
    Views
    1,067

    Sorry, you're right. It is a gas water heater. I...

    Sorry, you're right. It is a gas water heater. I meant to say the ignition is electric or automatic.

    So it is a bad thermocouple? Where is that located?

    Thanks,
  43. Answers
    7
    Views
    1,067

    Electric water heater won't stay on

    Bad title. I meant gas water heater.

    Sometimes there is hot water and sometimes there is not. No pattern to it.

    When we don't have hot water, I will turn the water heater off and back on. It...
  44. I replaced the strut assembly and that seemed to...

    I replaced the strut assembly and that seemed to be the issue regarding the placement of the wheel. It all looks straight. I know I will have to have it checked for alignment but it is driveable....
  45. I have checked a few things. If I pull the wires...

    I have checked a few things. If I pull the wires off the items pictured, I still have continuity through the white thing with blue wires and the black thing with the red wires. I do not have...
  46. I have already removed the strut (much easier...

    I have already removed the strut (much easier than anticipated) and it is certainly bent. I am getting one from a salvage yard today and will try to replace. I am guessing I will have to rent a...
  47. Electrical checks

    Ok, can you treat me like a child on this one and explain the electrical tests to me? I have attached some pictures. One of them shows the fuse and cut-off I think. One shows one of the two different...
  48. Can it be driven in this condition? Is there a...

    Can it be driven in this condition? Is there a danger in doing so or will it just make the damaged parts worse? Can a strut and knuckle be installed without a professional?
    Thanks again.
  49. Pics of area

    I did not replace the wheel. That was not hit. Here are some pics of the area in question. The blue line indicates the bar that I did replace. I know the bar that runs parallel to it is slightly...
  50. Images of what I am working with

    I have attached photos of the old and new motors as well as the wiring harness and the instructions provided with the new motor. I really can't understand them though. Do I need to make any changes...
Results 1 to 50 of 136