Search:

It seems that removing the fuel tank from this model Honda is a lot more involved than earlier year models. Any suggestions on the easiest way to do this?

In my situation I was able to eliminate the problem with a new set of tires. As much as the old tires did not show any signs of abnormal wear, they turned out to be the culprits. If you have any...

Anyone have experience changing a low-fuel indicator bulb (on the instrument panel) for a 1999 Honda Accord?

"pretty screwed"?? What do you think, I've been sitting around since January wondering how I'm going to take care of that problem? I had it taken care of a day later by twisting off the bolt with...

1999 Accord EX. 130,000 miles, 5 spd manual trans.

Lately a noise has been coming from my drive train. It is sort of a "wum wum wum wum wum" low-pitched sound that occurs only (and always) when...

I'm not sure of the item you are looking for... and I'm certainly not an expert in how the IRS may or may not approach your problem. However, when you file your tax return and deduct automobile...

At the end of 25 years you will have ZERO left and will have had only $79,610 distributed to you in the 25th year.

This complicates things but my money is still on a faulty ignitor as your problem. The ignitor in your dryer is most likely also functioning as a "heat sensor" that is sending a signal that allows...

First off... did you determine that the glow ignitor is not functioning? If it is not, replacing it is usually quite easy:

UNPLUG THE DRYER AND SHUT OFF THE GAS Remove the front panel on the...

What type of gas ignition does your dryer have? I believe some have "spark" ignitors and some are equipped with "glow" ignitors. If your dryer is equipped with a spark ignitor you should be able to...

99 Honda Accord EX, 4 dr sedan. Front Upper Ball Joints. Can these be pressed in and out of the upper control arm... or does the entire upper control arm need to be replaced?

Front Strut replacement. Removing the bolt from the bottom of the damper fork is becoming a problem. After removing the nut, the bolt does not want to come out. I can barely turn it by putting a...

What you are trying to accomplish is really quite basic and should not be a problem. The info you received from the plumbing supply company is right on the money as far as removing old paint. You...

The light on the dial of my radio is no longer working. Removing the radio is not a problem. However, I am unsure about taking the radio itself apart to look for burned out bulbs, etc. inside of...