Search:

Hello,
Overunity proved
See the link
https://youtu.be/1raDr-qRtrg
The weight of ball is 500 gram and counterweight is 800 gram.the seesaw is tilted towards counterweight side.
The ball is...

Dear Sir,
I think using of coil and magnets will be not a cool option instead of piston generator.
Because the lenz law though this law will not work at the time when ball will fall down but at the...

Why my videos are failed ?
If anyone who is physicist will never say that my videos are failed.
I have shown in my video that potential energy can be increased using minimal energy as input and...

I reshoot the video

In this video you can see easily how ball will fall down from a certain height.I have used a pin to hold the ball but changes in the design of box will work to hold and drop...

Dear Smoothly Sir,
At first I would like to tell you that no one has thought about this kind of mechanism ever before so it was not build if you don't believe me then search Google and tell me only...

Dear Sir,
At first I would like to tell you that it will lead new discoveries.second will provide energy at very less rate .it is very much possible that it can run a car .
An overunity device can...

No, overunity will not be affected by the first function as there will be an additional mechanical advantage in this mechanism due to counterweight.when ball will hit piston generator then the seesaw...

Overunity is possible and physics laws in itself doesn't prevent as you know better that only properties such as friction works to prevent it but in this mechanism friction is not an issue.even...

Friction is not an issue in this mechanism.you can see it clearly otherwise seesaw wouldn't get back it's initial position.the gravity will work to overcome the friction .
It is clearly an overunity...

Dear Talaniman Sir,
The most important point is in this mechanism we can increase the potential energy of the ball as per our desire by doing some changes in the design of box.and yes in other words...

Dear Ebaines Sir,
We will have to do some changes in the design of box to increase the potential energy of ball.
See this link
https://youtu.be/S-oAkOXDBYc

Dear ebaines Sir,
I have already mentioned that in this mechanism I can get desired slope height by just some changes in the design of box.it is not a big hurdle.that's why Im insisting on the term...

Dear Sir,
I have calculated the input after considering all components and as per my calculations the input will be maximum 2 to 3 joule for a 10 kg ball .I would also like to tell you that the...

So what is your view about output if 10 kg.ball hit piston generator from 10 cm.height.there is no input input is very minimal so there is only output in it.the main point is overunity.
I would like...

Dear Members,
See the attached link.
https://youtu.be/NTKw2Hp6tPw

Now I explain in simple words how it will work.
In the video you can see a seesaw having two ball each side .the red color ball...

https://youtu.be/4zEHV8Z8nH4
See the video and tell me input and output .the weight of small ball is 20 gram and front weight is 150 gram.

I would like to tell you that when counter weight side came down then it hit my hand like a hammer but I had to apply very less force to tilt the balanced seesaw .in this design motors will work as a...

Dear Sir,
The middle track is a seesaw but will work like a bridge to direct the ball from right to left and left to right.
The middle track thickness will be less and ball will be jumped on it...

Dear Sir,
The ball will be rolled back and forth between right and left seesaw s.the right seesaw tilts down and ball starting rolling down towards left seesaw and middle track seesaw will work to...

I'm building a working model of this device and will present it before all of you.I again say thermodynamics is nothing in this designas after unloading the mass the seesaw will be no more a part of...

Dear Sir,
In this design the thermodynamics laws will not work if you have understood it carefully.There is nothing related to thermodynamics laws in this design and if thermodynamics laws are...

This machine is based on gravity power and seesaw system.
We can make it more simple .
As per sketch there will be two seesaw system and both will be attached with a stand.This stand will work to...

Dear sir,can you please provide me some equations and formulas regarding your reply.

The travel distance of right side will be 10 centimeter from the ground.

Two 100 kilogram balls are mounted on a seesaw and this seesaw is in balanced position .Now I want to know that how much force I should apply on the right side arm of this balanced seesaw so that the...

Dear Sir,
it is clear that you have not understood my concept clearly what I want to say.But no problem just do this simple experiment.

take a scale and make a hole in the middle of this scale...

Dear Sir,
I'm not shaking flashlight but I'm shaking the seesaw system and this seesaw will work to shake equally of all attached flashlights with the equal amount of force to shake a single...

Sir, I have done some experiment and I'm glowing up 10 no. lights with the equal force to light up a single light using this seesaw system.

Dear Sir, I Took a Rubber band and try to stretched it with my hands and it was stretched .Now I took the help of an another person to catch this stretched rubber band in middle with the help of...

Dear Sir,
At first thanks for your response but just do a simple experiment .Take a Rubber band and try to stretched it with your hands and it will be stretched .Now take the help of an another...

In this sketch suppose a gun system is firing a ball with 5 meter / second and this ball is moving with the velocity of 5 meter/second and when this ball is reached at the end part of the engine then...

Dear sir,

Thank you for your answer but I want to know that if we use 10 no.
'SHAKE FLASHLIGHT' and attached these 10 flashlight with the seesaw system as per my sketch and press this seesaw...

Dear Sir,
In this design each circuit is separate with each other and each circuit is producing 2 or 1.5 volt output separately and you are correct that input power is still greater than output...

Dear sir,

In this sketch you will find that I have attached 10 fingers on the both side of seesaw system and this seesaw again moving with 3 volt toy motor but this time I have used 10 no....

So what kind of motor and circuit we can use for this device .
Sir,please guide me.
I shall be very grateful to you.

vikram.

Sir, you are correct and I have mentioned about this in no. 4 point but my question is that can we reuse this high voltage output with the help of capacitor to increase the torque of motor so that...

Sir ,Input energy is very very less to move the seesaw system as it is in balanced state or equilibrium state .we can move this seesaw system with just our finger tips or in other words input is...

48485

Dear Sir,
I 'm presenting a unique concept regarding Energy generation which is based on Magnetic induction law.
Sir In this device there will be a SEESAW system and two high tesla magnet...

Dear sir ,
thank you very much for your answer.
Sir I' m presenting a unique concept before this community to know the response .Please reply me that will it work or not.
Dear Sir,
I 'm...

AREA is 4 centimeter / square

Sir.
I asked you this question as I have a unique Idea regarding an Energy technology and want to develop this technology. If you are interested to know my Idea then I can post it for your review....

How much output I can get if a 3000 gauss neodymium magnet moves pass a 20000 turns coil after each 2 second and can I store this output in a super capacitor?

Will two magnets in which one has 3000 gauss strength (NEO) having 100 kilogram mass and second 30 gauss having 10 kilogram mass (FERRITE) then these magnets repel each other with equal force?

What will be the speed of a 500 kilogram mass satellite if we apply!00 N force on it after each second till 10 hours current velocity will be 16,800 miles per hour?