Search:

Replaced Air Filter with a new K&N Filter the other day, so I don't believe that is causing the problem, however a leaky injector could be the problem, need more Expertise on this Subject.

How...

To whom ever can point me in the right Direction:

I have 1995 Ford F-150 4x4 with a 5.8 L engine. The problem I'm having is when it runs it seems to run very rich... meaning I can smell fuel very...

Yeah I understand all that. However what I need to remove is just the bottom PLATE, nothing more.

[QUOTE=wildandblue;1348320]the fix would be different depending on whether this is a load bearing wall or if it is not. Do you know how to tell?[/QUOTE

Yes it is a Load bearing wall

I have a Garage with the bottom plate (2x4 wall) rotted. I have an issue with water shedding on the backside of garage that I'm currently fixing with a couple of french drains. However the bottom...

:)

Ok you Pro's!

I've got 2 things I'm considering!

1) Paying some one to paint my home. It's about 1700 sq. ft ranch with average amount of windows and Trim. How much should I be looking...

Hi trying to find some Old friends, but really don't want to pay for the Online Search sites. Is there any other way to find someone online that doesn't Charge? Any help in this regard would be...

Hi guys,

I have a home that has some engineered hard wood flooring that is glued down to the 3/4" Sub flooring (Plywood), is there a way of removing this flooring with out destroying the Sub...

I have a 1995 Ford F-150 XLT PU 5.8 L 4x4 that I'm having some trouble with. My check engine light is on, and The trucks Transmission Shifts extremely hard from 1st to 2nd gear (Auto) and from...

Hi, I'm experiencing the Same Problem. What I'm finding is that the Hard Drive is Probably Bad at least in my case it is. What you might try first is to see if your hard drive is spinning, or when...

:confused:

I have an HP laptop with Vista loaded and for some reason it will not detect my external hard Drive(300 GB) when plugged into USB Port. Any Suggestion on how to correct this problem...

I have a Canon i850s printer that I want to refill the Cart. But not quite sure how I should do this. The ink refill kit I have doesn't have my particular Printer listed in the How to's. Any help...

If anyone could send me in the right direction it would be greatly appreciated. What I'm looking for is some inexpensive DJ equipment. Primarily an AMP. It's a hobby I do for friends at party's, not...

Hi everyone, I'm trying to purchase an Amp for powering my Digital DJ station and Speakers. Want something that is reliable and produce enough power for parties. Not looking to go Pro, more of a...

Hey guys need some help with installing TimeShift on my Laptop PC with Windows Vista. When I try to install, I get a screen that pop ups that says "Last Dll error 1407, Description Cannot find...

This must have been a stumper! LOL

Can anyone tell me whether they would recommend bringing a Laptop on a Cruise ship? I guess what I'm worried about is leaving it back in our Cabin. Might it suddenly Grow legs? The Cruise Folks at...

Thank you. The front brakes were easy. How do I compress the back brake cyclinders? Do I need a special tool?

How hard are the brakes pads on a 2005 honda Accord to change?

I have a Motorola i580 Nextel Phone. The phone has the ability to play mp3's, however I don't have the Instruction and would like to put some music on the phone. Does anyone have any Idea how I might...

If you do not know it, you will have to have the radio pulled out to get the serial number off the back. From that you can get the code, I think from the dealership. I hope this helps!

First Mistake you made was getting Drunk, all the other mistakes you made after that are due to the first mistake. Maybe think a little bit next time before doing anything, like having too much to...

I Agree with 450, I would certainly install something like hardibacker to prevent tile from cracking or grout line from cracking. As for the toilet flange (Cf) being below the floor level, they do...

My F-150 has dual gas tanks. In the cab and on the dash there is rocker switch to change between the 2 tanks. That switch has become detached from the dash panel itself. What I want to do is remove...

Ok thanks! Will look into it.:eek: :eek:

Hi, can anyone direct me in the right direction. Last sat. I stepped on very large nail, and it went right into the bone. (YES YIKES) Bled for a while I cleaned it up and put Ointment on it and...

If it is Vinyl Siding, most manufacture do not recommend using Bleach to clean vinyl Siding. I would suggest asking your local home improvement store what they recommend, or you siding manufacture as...

Mark 10:17-18 (King James Version)
King James Version (KJV)

17And when he was gone forth into the way, there came one running, and kneeled to him, and asked him, Good Master, what shall I do...

I Don't think it could be said any better!:)

No it means he's a disturbed Individual and it doesn't matter what his Faith is, he need Help, LEAVE HIM ALONE! :eek:

(I Agree with this Price as to install and them being Wrapped or cased out with Coil. At least this is the price we charge in the South East):)

Yes measure from Jamb to Jamb, but subtract a 1/2" that seems to always help so that you don't get a window to tight, and also allows for adjustable main frame screw to operate.

Hal, I would recommend using nothing but 3x4 downspouts especially if you have a lot of trees around your home or building that you are installing gutters and D/S. They tend not to get plugged up at...

What Kind of Siding is it?

[QUOTE=glavine]as for the door install, to install it should run more than 400 to 500 unless he has to replace some casing, plus the door.

Yes I agree with glavine on the Install Price, some...

Well a lot depends on what type of Window you are looking for? Such things as Vinyl or wood? In a Vinyl Window I have used Alside windows out of Kinston, NC and Great Lakes Windows, although they can...

Thank you Speedball1 and Plumberman for your help, as you can see It helped me to complete my task. Just needed your Expertise advice as to how to continue. Thanks again!

5468

Well this could possibly not work, for many Fiber Glass doors are wood framed with a Fiberglass sheeting over the wood frame.

Ok, sounds like a plan, what about using a saw zaw to cut the pipe? What about getting the new Closet Flange anchored to the Concrete? The Concrete is busted out around the pipe maybe 3/4" all the...

This is the message I get with certain videos that I try to view, I have all java Scripts turned on, and I have downloaded the latest version of Adobe Flash player, but still seem to have this...

5458

5459

5460Plumberman,

Thanks for the Reply, maybe the Pictures can better explain my problem then I can. If you notice how high the Pipe sit above the concrete, well someone had a...

What I have is a bathroom I'm trying to remodel, I have removed the toilet in my 1976 home and found that I have a Cast iron 4" pipe and a cast iron Closet flange thats Shot, and I might add is not...