Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: Morrowrj

Search: Search took 0.02 seconds.

  1. Answers
    3
    Views
    476

    Do you know if the outlets are wired back to a...

    Do you know if the outlets are wired back to a junction box or is it a chain of outlets with power fed into first one, then out to the next, etc? Either way, you need to find your first point so you...
  2. Answers
    2
    Views
    470

    This is kind of vague. Did you try pushing a fuel...

    This is kind of vague. Did you try pushing a fuel priming bulb if it has one. If you push that bulb and it continues to run, then you have a fuel blockage. There are several places a blockage can...
  3. Answers
    1
    Views
    501

    If you turn the unit on and it shutsdown...

    If you turn the unit on and it shutsdown automatically it typically is detecting a power supply issue and shutting down in protection mode. Other than maybe a possible item that dropped into the...
  4. Answers
    5
    Views
    633

    This could also be an indication of water...

    This could also be an indication of water pressure issues. Are you connected to a municipal water source? If so, and if you have a standard water pressure regulator at the entrance to your home it...
  5. Question: Washer problems

    by Morrowrj
    Answers
    2
    Views
    308

    This is a drain failure code. Did you try...

    This is a drain failure code. Did you try cleaning out the drain catch basket? It may be obstructed with lint, or other mysterious small objects. I would clean this out first. If this fails to...
  6. Question: Snow Blower

    by Morrowrj
    Answers
    1
    Views
    372

    Yes, I would say you are correct and have a fuel...

    Yes, I would say you are correct and have a fuel delivery problem. How old is the fuel in the tank ? If you can empty it and replace with fresh that would be a good start. It is possible there is a...
  7. Answers
    2
    Views
    974

    This is not "normal" but it sounds like a...

    This is not "normal" but it sounds like a reaction. My wife had similar reaction to cortisone injections several years ago. She now includes cortisone injections in her list of known allergens when...
  8. This sounds like you could have had a plugged...

    This sounds like you could have had a plugged vent. If a vent get plugged and there is water going down a drain anywhere in your house it will create a vacuum. This vacuum can be strong enough to...
  9. I would try shutting down the other two zone...

    I would try shutting down the other two zone thermostats and then increasing the setting on the cold zone. Then see if your boiler is firing to provide heat. Also see if you can hear the circulating...
  10. Answers
    3
    Views
    715

    I would think this would get needlessly expensive...

    I would think this would get needlessly expensive to go and change your outlets out for GFI. What type of devices are you plugging in to these outlets ?
  11. Question: Contacts

    by Morrowrj
    Answers
    1
    Views
    448

    Do you have a goggle account ? If so are you...

    Do you have a goggle account ? If so are you logged in and is sync turned on?
  12. I would check the ground on the dishwasher as...

    I would check the ground on the dishwasher as well. I would also inspect the other electrical connections at the junction point in the dishwasher. It is possible a connection has come loose or was...
  13. Answers
    3
    Views
    431

    Can you further explain " flickers a little" Is...

    Can you further explain " flickers a little" Is this one time, continuous or ?
  14. Answers
    2
    Views
    532

    This sounds like the heat exchanger is getting...

    This sounds like the heat exchanger is getting too hot. It could be cutting out the burner on high limit. It is possible the heat exchanger or your a/c coil if you have one could be blocked. Do you...
  15. Answers
    2
    Views
    958

    When you say the furnace will not stop, do you...

    When you say the furnace will not stop, do you mean the burner or the air blower? Or perhaps both. This is important to help.
  16. Answers
    3
    Views
    529

    I would think you would want to use the boiler...

    I would think you would want to use the boiler water to heat the tank, and then run your domestic hot water through the tubing on the outside of that. Is this water constantly circulated or only as...
  17. Answers
    2
    Views
    345

    Are you on a well or city water? Gas or electric...

    Are you on a well or city water? Gas or electric heater? And do you have hard water by chance ?
  18. How does the engine die? Is it a sputtering death...

    How does the engine die? Is it a sputtering death or instant off? Instant off would lean towards a failing coil.
  19. Answers
    2
    Views
    2,210

    Since you have a fluke, you can measure the...

    Since you have a fluke, you can measure the resistance of the lower element before replacing. You MUST shut off power to the heater first! Then you check for voltage with the fluke meter, if voltage...
  20. Did you check oil level? Some of these have low...

    Did you check oil level? Some of these have low oil protection circuits to prevent engine damage
  21. Are you certain the cap and motor are the same...

    Are you certain the cap and motor are the same ratings as the removed equipment and not just the same physical size?
  22. Answers
    4
    Views
    1,835

    Is this a keyed connector? Is it possible you...

    Is this a keyed connector? Is it possible you have the wires in the wrong spot on the switch?
  23. Did you try pulling the plug out after some light...

    Did you try pulling the plug out after some light cranking to see if gas is making it to the top of piston? (is the plug wet or smells like gas?) Second, are all of safety interloacks working, deck...
  24. Answers
    1
    Views
    1,048

    If the blades are moving when you start the...

    If the blades are moving when you start the tractor something is wrong with your belt routing to your clutch. Do you have a belt diagram or is there one on the deck?
  25. Answers
    1
    Views
    827

    Did you check the motor nameplate? Sometimes they...

    Did you check the motor nameplate? Sometimes they stamped the wiring configurations right on the plate
  26. If it trips the breaker instantly, you have a...

    If it trips the breaker instantly, you have a short and unless you are an electrician, its time to call a professional.
  27. Answers
    2
    Views
    438

    Did you check you heavy gauge (large wire)...

    Did you check you heavy gauge (large wire) connections on both the battery and the solenoid you changed, remove and deposits and ensure they are tight. If these are good, verify your starter ground...
  28. Answers
    1
    Views
    2,552

    Should be 16 gallons

    Should be 16 gallons
  29. Answers
    1
    Views
    861

    This is from your graphics card. It appears the...

    This is from your graphics card. It appears the manufactures software has become corrupt. Your best bet would be to locate the model of Nvidia graphics card and download the software from their...
  30. Question: Electrics

    by Morrowrj
    Answers
    4
    Views
    409

    Can you provide more detail as to where these...

    Can you provide more detail as to where these conductors are? Is this in a home, an industrial setting, or ?
  31. Answers
    1
    Views
    260

    How old is the unit. Is the unit clear on all...

    How old is the unit. Is the unit clear on all sides from vergatation, etc. to allow good airflow?
  32. Answers
    1
    Views
    819

    Time

    Time
  33. Answers
    1
    Views
    337

    If you are looking for cranking pressure it...

    If you are looking for cranking pressure it should be at least 20psi. Otherwise about 60 +/- 10.
  34. Please explain where you found continuity?...

    Please explain where you found continuity? Between the two contacts for the socket ; or did you mean checking the leads of the bulb itself?
  35. Answers
    1
    Views
    1,201

    Its "Am I the Same Girl?"by Swing out Sister

    Its "Am I the Same Girl?"by Swing out Sister
  36. Don't type it into your search field. You need to...

    Don't type it into your search field. You need to type it directly in your web address bar at the top of your browser screen.
  37. This sounds like a modified penny done by a...

    This sounds like a modified penny done by a private company for the bi-centennial. Purely a novelty item.
  38. Not sure of the holding tank volume on your...

    Not sure of the holding tank volume on your particular boat. I would use 1/2 cup per hundred gallons, if tank is smaller, go with 1/2 cup. Let sit 24 hours and then drain. It does not take much but...
  39. Answers
    2
    Views
    486

    Is it actually 81 degrees in the structure? Not...

    Is it actually 81 degrees in the structure? Not sure if you are saying the temp reading is inaccurate or the building won't cool down ?
  40. Answers
    1
    Views
    1,126

    The other side (small wire) of the solenoid needs...

    The other side (small wire) of the solenoid needs to be grounded. Are you certain the "new" solenoid is correct for this application and is it wired correctly?
  41. Question: 7.3 Hard Starts

    by Morrowrj
    Answers
    2
    Views
    364

    Did you try testing your glow plugs to see if...

    Did you try testing your glow plugs to see if they are still good ? Also, have you emptied water seperator and checked your oil level?
  42. Answers
    1
    Views
    346

    Absolutely this will make the unit inefficient as...

    Absolutely this will make the unit inefficient as it will not be able to transfer the heat off as well. This will probably lead to premature failure as well. Keep it cleared at least 2.5 feet on all...
  43. Answers
    14
    Views
    11,719

    Mike, When do you read 30 lbs? This sounds...

    Mike,
    When do you read 30 lbs? This sounds rather low. I would be looking for about 60 once the pump shuts off (completes cycle) Is this a bladder tank as jlisenbe mentioned ?


    Robert
  44. Did you try a defrag of the HD? This will give...

    Did you try a defrag of the HD? This will give you a more accurate free space measurement.
  45. Answers
    1
    Views
    359

    This has been done many times... Tina Turner ,...

    This has been done many times... Tina Turner , Brenda Lee , Tammy Wynette
  46. Answers
    1
    Views
    3,016

    Does it not have a dipstick? Perhaps your engine...

    Does it not have a dipstick? Perhaps your engine is shown in this chart/? http://www.briggsandstratton.com/maint_repair/routine_maintenance/changing_oil/oil_capacity_chart.pdf


    Morrowrj
  47. Answers
    2
    Views
    605

    Yes, 60 watts is 60 watts. You will be fine in...

    Yes, 60 watts is 60 watts. You will be fine in uping the wattage of the fluorescent. The lower wattage equates to less heat, so you could easily use a 100 watt equivalent flouresent which would be...
  48. Answers
    1
    Views
    337

    Don't know what you mean by belt lubricant......

    Don't know what you mean by belt lubricant... ick. Anyway, have you ever greased the deck spindles ? It could be the grease is gone and your bearings are failing. Check underside for grease fittings...
  49. Answers
    1
    Views
    1,050

    It is likely that there could be a vent on the...

    It is likely that there could be a vent on the top of the unit and if water got that high it could enter slowly. There should be an oil inside the unit. If there is a drain on the bottom you could...
  50. Question: Fixing sensors

    by Morrowrj
    Answers
    5
    Views
    574

    We need more info here

    We need more info here
Results 1 to 50 of 348