Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: Celer

Search: Search took 0.00 seconds.

  1. Your girders are under your joists which probably...

    Your girders are under your joists which probably on contrete footers. You can not upsize the girder but can put more footers were you want to expand then add another girder Running off the end of...
  2. Answers
    7
    Views
    751

    I would rather suggest the mold cleaner at Home...

    I would rather suggest the mold cleaner at Home Depot, the name excapse me now but it's 30 bucks and it works.
  3. Answers
    1
    Views
    466

    Did you leave 1/4" expsnstion gap from wall to...

    Did you leave 1/4" expsnstion gap from wall to laminate? Did you stagger seams 12" apart?
    What do you have for vapor barrior?
    What size is the MM grade 7? Or 12mm?
  4. Answers
    7
    Views
    751

    You will need to open up the wall. Do you have...

    You will need to open up the wall. Do you have access behind shower wall?

    There is probably cement board or sheet rock behind it which both can hold moisture and mold. Also need to check 2x4 for...
  5. Sounds to me like it wasn't fully sanded before...

    Sounds to me like it wasn't fully sanded before it was stained.
  6. Question: Ceramic Wall Tiles

    by Celer
    Answers
    4
    Views
    538

    I don't think cement board was around that long...

    I don't think cement board was around that long ago.
    You probably have Sheetrock or some sort of plaster lath walls with tile. I think best to gut the bath and start over painting tile that is that...
  7. Answers
    8
    Views
    696

    No. Not true I would have told him to change the...

    No. Not true I would have told him to change the blade on the cutter.
  8. Did you stagger your seams 12" apart? How is the...

    Did you stagger your seams 12" apart? How is the perimitaer spacing for expanstion.
    T-bar won't remedy the sounds.
  9. Answers
    9
    Views
    59,124

    I would tap small roofing nails between the grout...

    I would tap small roofing nails between the grout Lines to hold the tiles up there.
  10. Answers
    5
    Views
    977

    Correct thanks for pointing that out.

    Correct thanks for pointing that out.
  11. Answers
    5
    Views
    977

    6 DFU Sure-Vent 1.5" Air Admittance Valve...

    6 DFU Sure-Vent 1.5" Air Admittance Valve Installation Kit - Includes P-Trap, 6" Extension Tube, PVC Threaded Adapter and Deep Box Flange at Menards
  12. A exterior thinset morter would work but I...

    A exterior thinset morter would work but I wouldn't recommend mixing in out in the sun and mix small batches.
  13. The difference is you do not use mastic tile glue...

    The difference is you do not use mastic tile glue on floor and in or around wet erea. So use thinset modified, cbu board over proper amount of plywood.
  14. Answers
    10
    Views
    3,697

    Ok I don't think anyone asked if this was above...

    Ok I don't think anyone asked if this was above grade or below grade?

    Do not double up on VB so don't put 6ml plastic down you will trap moisture between the VB.
    Dream Home - Quiet Walk...
  15. Answers
    1
    Views
    520

    Laminate is plank flooring but sheets would be...

    Laminate is plank flooring but sheets would be linoleum. Is this Australia?. Google laminate flooring in your area.
  16. Answers
    8
    Views
    6,153

    Some laminates are below grade rated. Always...

    Some laminates are below grade rated. Always check the warranty 1st.
  17. Answers
    8
    Views
    6,153

    Liquid spills are with any laminate, once it gets...

    Liquid spills are with any laminate, once it gets into the masonite between the cracks it's done.
    Although I'm a firm believer of making any laminate nice if installed correctly.
  18. Answers
    3
    Views
    733

    I don't know what plumbing codes are where you...

    I don't know what plumbing codes are where you are but you can close the vent off if there is no other fixture tied into the vent. Move your sink then add a cpvc air vent that sits under sink, it...
  19. Question: Laminate flooring

    by Celer
    Answers
    3
    Views
    967

    You said you have perimitaer gaps? How much of a...

    You said you have perimitaer gaps? How much of a gap, sounds to me you didn't give enough... gap size needs to be 1/4", 3/8" won't cut it.
    And seams need to be staggered 12" from another.
  20. I don't think you will only be able to run the...

    I don't think you will only be able to run the fan with out the unit firing up which will not work since its hotter outside then the furness is calling for. The fan is just so it's not conctently...
Results 1 to 20 of 20