Search:
Type: Posts; User: marburg
Search:
Search took 0.00 seconds.
-
Thanks Norton 18. Yes you have been very helpful. Unfortunately jumping the psu didn't work. I think the mobo is dead.
-
Thank you Norton18.
I will try that this weekend and post back here whether that worked.
Marburg
-
Well, clearing CMOS didn't help. Still dead.
-
Hi,
Thanks for your answer. Yes, I did. The CPU fan does not come on. The only thing that comes on is the light on the mobo. No CPU fans, no power supply fans, no device lights, no hard drive...
-
An Emachine T2885 was brought to me with what appeared to be a simple power supply problem. I was told the PC problem occurred after a massive power outage in town. The PC supposedly came back on...
-
Do you have the installation cd for the motherboard and the pci multimedia card? If you do, simply insert the cd and run the installation. This will install the drivers needed.
If you don't have...
-
If you go to HP.Com click on the tab for support and drivers, enter your exact model and you should be able find out the specifics on your computer. You can also email them or call them and they...
-
How old is the computer? What operating system are you using? How long has this been going on? There are so many possibilities as to what could be going on based on your question.
You could...
-
If your new drive fails, I would try replacing the cables connecting your drive to the mother board.
How do you have it configured? In most cases the CD Drive is on the same cable as your main...
-
Hi RickJ,
I also have a Seagate external drive with the same issue. In my situation, my home PC (home built) disconnects it just fine while my office PC (Dell) does not. What I found to be the...
-
Dr. D
Have you checked your modem settings? I had a modem that used as a default setting to automatically log me off the internet after 10 minutes of inactivity. If your modem has been set to...
-
Exactly Scott. I just assumed she meant a wireless broadband card since she referred to a wireless card. Most folks in my area call a wireless broadband card a wireless card.
Marburg
-
You are welcome!
Glad I could help
-
What is your Operating System? If it is Windows XP then you should be able to use the System Restore. Simply click on a restore point that is just prior to the installation of Norton System Works. ...
-
Download and install Belarc advisor (free program at belarc.com). This program will analyze everything installed on your computer. If a serial number is available or embedded it might show it. It...
-
A wireless is pretty simple really. You have to make sure your notebook has a slot for wireless cards. They are usually on the side or back. You can take your notebook to any cell phone store...
-
Hi,
Did you by chance use the installation CD that came with the monitor? I had the same problem with a BengQ LCD monitor. I found that after I uninstalled the drivers that came with the CD, and...
-
Sound like ScottGem's answer is what I would try. If you right click on My Computer a drop down menu. Click on System properties. From there you can click on the tab called Hardware. Click on...
-
I've seen this situation many times. I've had a number of folks who had a similar situation and it usually has been the motherboard touching the case. Sometimes eyeballing it doesn't help because...
-
Not only what abbaschang said, but if it is software and you installed it on your computer, the 30 trial count down would still be in effect. Many companies offering 30 day trials also but a...
-
You don't state what model Acer.
There are several things to look at. The first is ram. You state that your new PC by Acer has 256 RAM. You probably need to bump that up to at least 1 gigabyte...
-
Thank you esquire1. I had cleaned the seals before but didn't clean the side it mates up to. So, I went back and re-cleaned the seals and made sure that I did the same to the surface. As of right...
-
Hi,
I'm new here. I have a 9 year old Maytag refrigerator with a freezer on top. Recently whenever I close the refrigerator I notice that the freezer door pops open. I looked at the seals...
|