Search:
Type: Posts; User: rasco847
Search:
Search took 0.00 seconds.
-
Double check that the board is wired correctly. Its easy to wire up wrong. Check w wire diagram
-
Thanks for the response. So just use dirt?
-
Hi, my name is Omar. We've had a pretty dry summer this past yr in the midwest and I guess that affected the dirt around my foundation because I can see my water sealant line on the outside. I was...
-
After all the issues I was having, after replacing starter, were a result of a poor connection off the + cable to starter. Once making sure there was good connection, the problem went away
-
Capacitors were bought at radio shack. Tv still working
-
Well I finally got the damn thing fixed. Yay! It ended up being the board which sucks, though I did get to know my furnace pretty well. If anyone has ?'s about this carrier model, I can help you
-
Anybody have any troubleshooting tips or advice?
-
I've checked the flame sensor for microamps and got 1.2 reading, not sure if its strong enough to tell the bouard there's a flame present. I'm starting to think the board is no good, but I hope not....
-
I checked out both wires(ground n flame sensor wire) and both ohmed out @ .3ohms. I checked to make sure flame wire is not touching any ground. Im starting to lose it here, still no workie
-
Thanks for the response Ttop. I will check the sensor wire and the ground when I get home tonight. Keeping my fingers crossed and hope I find the smoking gun
-
5RZmE8EhtPQ
It flashes code 33 "ignition failure" when unit doesn't stay on.
-
Hi,
I have a carrier furnace that won't stay lit, model 58sta135. In my opinion It goes through the complete sequence but flame goes out and after 4x's and it locks out. I've replaced the flame...
-
I'm at work right now, but I'm going to do it as soon as I get home (11pm central)
Really appreciate your help, Tx
-
"1. If the starter motor doesn't turn, but the starter solenoid (relay) "clicks" when the ignition switch is turned to Start, the problem is with the battery, starter solenoid, or starter motor...
-
"When installing the starter cable, make sure that the crimped side of the ring terminal is facing out"
What does that mean "facing out" ?
-
Sorry I forgot to mention that sometimes it does start, but when it doesn't and I turn the key I might get one click and after that every time I turn the key it does nothing, no click, the headlights...
-
Hi my name is omar. I recently have beeen having trouble w/my car starting, 1st it wouldn't start unless I tapped on the starter while someone turned the key, and it started, so I replaced the...
-
I've checked the switch and it has a rotary type thing to regulate the wiper speed and it doesn't start read any ohms till its almost fully open... is this correct?
-
Sorry it took so long to respond, I have replaced the parts (capacitors) and the TV has been working now for 3wks. I will post some pics later. Capacitors cost 1.25 each.
-
There 2 studs w/torx tips... so I would need a socket w/a female torx... do you know what size this is?
-
Seems like the flashing has gotten worse, so I cracked open the TV and noticed the capacitors on the inverter boards (both) have the tops split open w/a little bit of black ooze coming out. When I...
-
What the best way to check the switch?
-
Hi everybody, my wipers just stopped working... I checked the 10A fuse inside the car and its good... found a couple relays under the hood and I ohmed out the prongs that are connected inside (from...
-
The picture is still visible and you can hear the sound but it flashes sort of like a strobe light. It started doing it before I left for work and when I got home it was fine, but in the morning it...
-
Cleaned out the pilot and everything is working great... thanks a bunch :) you were a great help
-
I'm starting to understand, if the pilot is not lit the thermocouple doesn't heat up and the gas valve won't open, right? But would the blower not turn on also?
-
Thanks for your response, hvac. I'll get the information on the parts when I get home(at work), but am wondering where is the spark box located? I only saw a transformer, fan limt switch, gas valve,...
-
Hi my name is Omar and am having a problem w/our furnace.It's a package unit, natural gas and is 20+ yrs old When I turn it on(heat) I can hear the thermostat click but nothing turns on(burners or...
-
Hi I'm Omar. I have a compac laptop that runs windows vista basic. I'm recently having a problem w/my start menu button, it does nothing when you click on it, you can see its being clicked but...
-
hi my name is omar. I recently had a water leak in the basement (finished) and part of the carpet got soaked. ( 2' x 6') I tried to clean w/a carpet cleaner, but the mildew smell is still there. I...
-
I moved into a townhome 2yrs ago. And noticed last summer our tree in the front lost all its leaves in August. Now the tree has some greenish/grey mold on the trunk, don't know if that has anything...
-
I'm moving my computer upstairs and want to know if I can install a wireless card? The reason I'm asking is I have a hp pavilion s7310n slimline desktops, and I'm not sure if I need a special card...
-
How high should the water level in the pit be before the pump is activated?
-
The pressure gauge has been on for a little over 24hrs. Its constantly on 60psi. The other needle shows the psi hit a high of 70. I know u said it should be around 45-50, could this be the cause of...
-
Thanks you guys for your input. I'ma switch her food soon, though I don't think I'll have a problem she loves to eat :D
-
I have a chocolat lab that just turned 1, and I'm wondering when do I stop feeding her puppy food? Omar
-
Its possibly u have a head gasket leak. Did you get a coolant flush? If u don't regularly PM your car ( like the cooling system) crud n stuff builds up and starts sealing stuff. But when u flush the...
-
This radiator stop leak won't solve the problem u have or may not even help the problem. U can usually smell antifreeze in the oil by smelling the oil fill hole and vice versa. Best thing is to do is...
-
Cv boots usually click when your turning. Maybe you have a motor/trans mount problem. How's the shifter?
-
Hi tom
I went to homedepot and purchased a pressure gauge and hooked it up to the garden hose it read 50psi @ 1st. After an hour it went up to 60psi. The instructions said to leave on for 48hrs to...
-
Hi tom I'm not really sure where to check the pressure? Is it on the same meter that the city uses to meter the water? I'm @ work now but will check around when I get home tonight
-
I've had this problem before changing cartridge. Thanks for the response though.
-
I have an update if it helps. I've put the old cartridge back in and it stays in, but when I turn the water back on. Its OK. But if I flush the toilet it'll (the shower valve) pop out and turn on...
-
I've noticed when I shut the main water off for the house, there's still water coming in very little though( dribbling). Is this normal?
-
From my experience its best to bet "don't pass bar" meaning the shooter is not going to hit there point. The house always wins. Good luck
-
Is it good to leave your computer on all the time or turn it off all the time? The reason I'm asking because I heard somewhere that the power supply for the computer lasts longer.
-
I just installed a 4 bulb light fixture in the grage (110V) using a 4 bulb ballast. The problem I'm having is one bulb doesn't come on. I've changed bulbs and still the samething. I'm thinking it...
-
In my house its sounds like the sump pump kicks on and sucks the water out of the toilets lowering the level. It does this often, maybe once or twice a day. Does this sound familiar to anyone and is...
-
I have a push in/out valve for the shower,it's a moen but I don't know any model #. The problem I'm having is if I'm pushing it in to close, it opens up back up. Full blast( as if it was under...
|