Search:
Type: Posts; User: bfordz
Search:
Search took 0.00 seconds.
-
Try uninstalling the current drivers for the keyboard or uninstalling the keyboard and then reboot your computer.
If that doesn't work, try an external keyboard and then go to Dell and download the...
-
For those kinds of errors (and many others) I just Google them to get results.
Try this and see if it's something you'd want to tackle;
How to Troubleshoot a Stop 0xC0000218 Error Message
-
How did you access your old email account?
If you did webmail then the pictures are gone without having access to the account anymore.
If you used Outlook or Outlook Express, Microsoft Mail or...
-
Have you tried a CD? If not try any type of CD, music or data, if it won't recognize a CD either then the drive is probably / definitely gone.
Although, just because the CD works doesn't mean the...
-
Nvdragon,
Thanks again for the reply,
I've got one ordered and I'll look the rest over good before I install it.
And I guess I'll Thank the good Lord I didn't get 'blast off', I did try to turn it...
-
Nvdragon,
Thanks for the reply. Yes, your correct in your description.
This has been a real royal pain in the "A". You mention the pilot orifice... and I read where some have taken a wire to clean...
-
192.168.0.1 is not a router, it's the router's IP address or gateway you're using.
What brand router (box) do you have?
If you've set a different password, other than the default password,...
-
After replacing the transformer I noticed one time that the burner didn't kick in after starting (resetting the power) it back up. The pilot lit OK but the burners just wouldn't kick it like they...
-
What brand HDD is it? Most HDD manufacturers have their own disc diagnostic utility software you can download and run to test the HDD for errors.
Try that and see what it tells you. Most also have...
-
Do you have a "num lock" key in 'blue' which uses a "Fn" key along with another key with blue Letters or symbols.
If nothing there, try going into the CMOS/BIOS settings to see if there's a Bootup...
-
Before you removed the 'old' memory (ram) did you unplug the power cord? It's always a good idea to remove power to the computer before unplugging or removing hardware from the board.
Also, did...
-
Well, I took a guess and replaced the transformer and that didn't fix my problem.
It still is humming when it won't turn back on or kick in and start another heat cycle.
I'll keep trying!
-
Thanks again for your explanations.
-
Thank You for the reply;
Is the 'hot' side still the switch side back then?
-
Is there or was there any rhyme or reason to the way they ran the knob and tube wiring? I've noticed the two wires don't always come from the same direction; e.g.. I installed a box for a wall...
-
I've got an older Carrier Weathermaker SX; 58sxa080 series 100 furnace.
It won't turn back on or cycle after one heat cycle; it comes up to temp. turns off then won't kick back in, on it's own,...
|