Search:
Type: Posts; User: pjl153
Search:
Search took 0.00 seconds.
-
I have moved 4 romex cables (4 different circuits) from the old main panel and ran them into a 8 x 8 pull box. I then ran new romex to the new main panel 20 feet away and made the connections to the...
-
If the hot and the netural wires connected in reverse at an outlet can that give me voltage on the ground wire?
-
With the meter in series between the ground wire and the ground bar I get 50 some odd volts with the power on. With the power off I get continuity between the hot black wire and ground. I found it...
-
No the braided ground is 6 or 7 copper ground wires twisted together and then screwed into the netural bar. I have just split the netural and grounds in the sub panel and isolated the netural. The...
-
I had the alarm put in in 2003 and haven't been using it for the past 5 years. I want to set it up either to call my phone or contract with a alarm company. I need the master code either way to...
-
This is in a sub panel 100 amp/220V in the other half of the cellar. The electrian who put in the new 200 amp panel did not make the 100 panel a sub meaning he left the neturals and ground connected...
-
If it's not what is plugged into the outlets what in the outlet box could it be? What should I look for?
-
I have a First Alert alarm system model FA110C. My question is how can I find the master code? I have tried the original 1234 code button, 1111 code button and the installer code 4112 code.
Any...
-
I found one circuit that has 52 volts between the ground wire and the ground bar. I unplugged everything on that circuit and turned off the lights. No change. What do I look for next?
-
Does a 100 amp sub panel need a main breaker?
-
This was the main panel when the house was built. It looks like the electrican did do the whole job when he put in a new 200 amp main and made the 100 amp panel a sub panel.
-
My 100 amp panel has a 4 wire feed. 2 hot wires to the 100 amp breaker and the netural and ground wire go to the same ground bar which is grounded to the panel. I this correct or should there be a...
-
I have 3 circuits in my panel and the grounds are twisted together. When I removed that braided ground from the ground strip it causes a spark and I got a shock touching the wire and the box. I tried...
|