Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: jgrella

Search: Search took 0.00 seconds.

  1. Let's start by first looking in the freezer about...

    Let's start by first looking in the freezer about midway down. Do you see frost building up on the back wall? If you don't. It is not the defrost timer or anything pertaining to the defrost system at...
  2. Answers
    2
    Views
    1,266

    You don't have to go that crazy looking for the...

    You don't have to go that crazy looking for the problem. It is simple. The machine is telling you what is wrong by giving you an error code of f-1 or e-1. Which will usually check back to a bad...
  3. Yes it is possible for the timer to cause no heat...

    Yes it is possible for the timer to cause no heat in dryer but very unlikely. When you turn on the dryer to timed cycle does the timer continue to advance? If it does the timer is OK.
  4. Answers
    1
    Views
    327

    Are both hot and cold valves open to the machine?...

    Are both hot and cold valves open to the machine? What is the model number? I will walk you through the check. Please email me. [email protected]
  5. Question: Kenmore HE3 Dryer

    by jgrella
    Answers
    4
    Views
    3,710

    What is the model and serial number? It sounds...

    What is the model and serial number? It sounds like a bad motor. Do you know if your vent is clean?
  6. Answers
    5
    Views
    4,232

    I see this problem often. It is bad rollers or...

    I see this problem often. It is bad rollers or bearings depending on the model of your machine. I would replace whatever your dryer uses. What happens is when the clothes are being dried, the drum...
  7. Question: Kenmore dryer

    by jgrella
    Answers
    4
    Views
    2,600

    Your problem is the thermofuse on the dryer...

    Your problem is the thermofuse on the dryer internally. That is what the repair tech was speaking of. It would need to be replaced not reset. It is not a resettable fuse. I would also check your...
  8. Question: Kenmore dryer

    by jgrella
    Answers
    5
    Views
    1,058

    I would check the thermofuse and vent. It sounds...

    I would check the thermofuse and vent. It sounds like you blew the dryers safety fuse. Usually caused by clogged vent. What is the make and model/ serial numbers?
  9. Question: Kenmore dryer

    by jgrella
    Answers
    4
    Views
    1,058

    Do you get any heat? If you do and it just takes...

    Do you get any heat? If you do and it just takes a real long time to dry I would check your dryer vent from the house. It could be clogged. If you don't have any heat at all I would check the...
  10. Question: Kenmore o/s

    by jgrella
    Answers
    2
    Views
    708

    This could either be a bad motor or drain pump....

    This could either be a bad motor or drain pump. When the washer stops is it in a drain cycle?
  11. Answers
    1
    Views
    317

    Is this a toploader or frontloader? If it stops...

    Is this a toploader or frontloader?
    If it stops after the rinse cycle I would check the lid switch. You may have a bad lid switch which would prevent the washer from going into s pin and drain...
  12. Answers
    3
    Views
    1,044

    It sounds like a drain issue believe it or not. I...

    It sounds like a drain issue believe it or not. I know you said you recently cleared the filter. Was there anything in it? If there was it might have burnt out the motor and the washing machine will...
  13. Answers
    3
    Views
    1,044

    It sounds like a drain issue believe it or not. I...

    It sounds like a drain issue believe it or not. I know you said you recently cleared the filter. Was there anything in it? If there was it might have burnt out the motor and the washing machine will...
Results 1 to 13 of 13